| Select Input Voltage: | DC12-48V (Base) |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
Please note that the dimensions of V4-K has been upgraded to L187mm*W46mm*H36.5mm (knob height 14.5mm).
● RGB / RGBW constant voltage RF LED controller, can also be used as a RGB / RGBW RF remote. (If used as a controller, it's only compatible with Skydance's remote controls)
● 4 knob dimming, digital numeric display and easy key operation.
● Match with RF 2.4G single zone or multiple zone RGB / RGBW remote control optional.
● 256 levels 0-100% dimming smoothly without any flash.
● Built in 10 dynamic mode, include jump or gradual color change style.
● PWM frequency 1000/2000/4000/8000Hz selectable.
● Logarithmic or linear dimming curve selectable.
Using V4-K controller to control LED lens module:
V4-K Manual Sheet Download
Technical Parameters
Input Voltage: DC12-48V
Output Voltage: 4*DC12-48V
Input Current: 16.5A
Output Current: 4CH, 4A/CH
Output Power: 4X(48-192)W
Output Type: Constant voltage
Control Type: Konb+Key+RF 2.4GHz
Control Distant: 30m(Barrier-free space)
Dimming Level: 256 levels
Dimming Range: 0 -100%
Dimming Curve: Logarithmic or linear
PWM Frequency: 1000/2000/4000/8000Hz
Operation Temperature:-30℃~+55℃
Case Temperature(MAX.):+85℃
Waterproof Rating: IP20
Protection: Revese polarity
4 Knob Controller Work as RGBW RF remote
This 4 knob RGBW controller work as RGBW RF remote can match with one or multiple RGBW LED RF controller.
End user can choose the suitable match/delete ways. Two options are offered for selection:
1. Use the controller’s Match key
Match:
Short press match key of receiver, immediately press on/off key on the knob controller.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key of the receiver for 5s to delete all match, The LED indicator fast flash a few times means all matched RF remotes were deleted.
2. Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 3 times on the knob controller. The light blinks 3 times means match is successful.
Delete:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 5 times on the knob controller. The light blinks 5 times means all matched remotes were deleted.
