Spec Sheet - DCFLS-12V-RT1809X300

Select Length:	16.4ft (5 meters) (Base)
Select Light Color :	Addressable RGB (Base)
Select Operating Voltage:	12VDC (Base)
Select PCB Color :	White Background (Base), Black Background (Base)
Select Waterproof Rating:	Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets, Underwater IP68 - Adhesive Back
Availability	In Stock
Condition	Brand New

Feature

1. Dual-signal wires version, signal break-point continuous transmission. If one led is damaged, it will not affect the other LEDs working.

2. With 4-pins male connector and separated power/ground wire at both ends for easy interconnection and power connection.

3. Waterproof IP67: the ribbon light is covered with silicone protective sleeve, which can protect it well and makes it easy to clean.

4. Individually addressable: Every 1 IC control 1 LEDs, every LED can be individually addressable and show any color you want. The strip can be cut off between every one LED without damaging the rest strip if you want it to shorten or lengthen, also can be re-connect by provided connectors.

5. The digital LED RT1809 (Similar to WS2815) fully color integrates all electronic components into a single 5050 luminaire, without the need for any other peripheral electronic components to assist in forming a complete internal control pixel.in the meanwhile, the WS2815 LED strip reduces resistance caused by inverting the product during installation.

6. Wide compatibility. Works great with LED screnn, LED wall, advertising board, and widely apply for KTV, hotel, bars, clubs, wedding party lighting, etc.

[ VIDEO: Watch on YouTube ]

WS2815 Chips Specifications Download

Standards and Certifications

DC12V

Specifications:

LED Resource: 5050 SMD RGB

IC Type: RT1809 IC

Input Voltage: 12V DC

Power: 14.4W/M, 72W/Roll

LED Quantity: 60LED/m, total 300 LEDs, each LED is separately controlled

IC Quantity: 60 IC/meter (1 IC drives 1 led chip)

Dimensions: L500cm(196.8 in) x W1.0cm(0.39 in) x H0.25cm(0.10 in)

Waterproof: Non-waterproof or IP65/IP67/IP68

Cuttable: Every one LED is cuttable

Colors: Full-color RGB, dream color changing

FPCB color: White /Black PCB

Lumen Per LED: 20~22Lumen 6600lm Max /16.4ft

Working Temperature: -4°F (-20°C) ~ 122°F (50°C)

Storage Temperature: -40°F (-40°C) ~ 176°F (80°C)

Beam Angle: 120 degrees

Lifespan: ≥50000hrs

Technical Features

The control circuit and RGB chip are integrated into 5050 components, to form an external control pixel

Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of the waveform of the signal takes place.

Refresh Frequency updates to 2 KHz. It supports the lower frequency and inexpensive MCU.

Any two points the distance less than 3m transmission signal without any increase circuit

The data transfer protocol uses a single NZR communication mode. Every pixel adopts auto-reshaping transmit technology, making the pixel cascade numbers are not limited to the signal transmission, only relate to the speed of signal transmission.

The BIN receives the data signal, which ensures that any the IC's damage does not affect the signal cascade transmission and make the BIN in the state of receiving signal until the restart after power-off.

DC12V RT1809 300LEDs(Similar to WS2815) Individually Addressable Breakpoint Continue 5050 RGB - photo 1

Waterproof Level Description

IP20 IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare, with a self-adhesive back, For Indoor);

IP65 IP65 Waterproof (Epoxy cover waterproof, PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, For Outdoor & Indoor);

IP67 IP67 Waterproof (Silicon sleeve waterproof, PCB is encapsulated with silicon tube, with a plastic fastener, better waterproof, For Outdoor);

IP68 IP68 Waterproof (Fully waterproof plastic irrigation, PCB both surface and back are encapsulated with plastic Gel, with a plastic fastener, the top level of waterproof, For Outdoor);