5A 4CH 12-36VDC CV 0/1-10V LED Dimming Driver L4-D

5A 4CH 12-36VDC CV 0/1-10V LED Dimming Driver L4-D has been discontinued, you can check out this model - 0/1-10V Constant Voltage LED Dimmer L4-L for replacement. 

Please note: If you still order this item, we will send you L4-L. 

 

L4-L Manual Download    

 

Features

● 4 channel 0/1-10V LED dimming driver

with push-dim function.

● 4 channel 0/1-10V input,

4 channel PWM constant voltage output.

● 0~100% dimming range via logarithmic characteristic

can be very comfortable for human eyes.

● Compatible with active or passive 0-10V,

1-10V dimmer can solve the fluorescent

lamp dimming system compatible with LED lighting.

 

Technical Parameters

Input and Output: Input voltage 12-36VDC

Input current: 20.5A

Output voltage: 12-36VDC

Output current: 4CH,5A/CH

Output power: 4 x (60-180)W

Output type: Constant voltage

 

Dimming data

Input signal: 0/1-10V + Push Dim

Dimming range: 0 -100%

Dimming curve: Logarithmic

PWM Frequency: 500Hz

 

Safety and EMC

EMC standard (EMC): EN301 489,EN 62479

Safety standard(LVD): EN60950

Certification: CE,EMC,LVD

Warranty and Protection: 5 years

 

Note:

● The 0/1-10V input is operable via commercially available simple rotary wall switches designed for 0/1-10V dimming equipment or from dedicated system central dimming controllers.

● Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).

● We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces, The maximum length of the wires from the dimmer to the LED driver should be no more than 15 meters.

● If the LED driver is used with the Push-Dim interface prior to using the 0/1-10V interface, the 0/1-10 V signal should change over 10% to return 0/1-10 V control.

 

Push Dim Function

The provided Push-Dim interface allows for a simple dimming method using a commercially available non-latching (momentary) wall switch.

 

Short press:

Turn on or off all 4 channel light.

● Long press (1-6s):

Press and hold to step-less dimming, adjust 4 channel brightness at the same time.

With every other long press, the light level goes in the opposite direction.

● Dimming memory:

Light returns to the previous dimming level when switched off and on again, even at power failure.

● Synchronization:

If more than one controller is connected to the same push switch, do a long press for more than 10s,

then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to the controller should be no more than 20 meters.

 

 

Specifications Download