Spec Sheet - MT-100-400-D1A1

Availability	In Stock
Condition	Brand New

Deliver precise, professional-grade lighting control to your specialized fixtures with the Ltech MT-100-400-D1A1, a dedicated 0-10V constant current LED driver. Uniquely engineered for magnetic and linear lamp systems, this compact magnetic driver ensures whisper-quiet operation, eliminating the high-frequency noise common with lesser components. It provides exceptionally smooth, flicker-free dimming from 0% to 100%, automatically adapting to both 0-10V and 1-10V control signals. With features like non-polarized inputs, selectable current outputs, and comprehensive safety protections, the MT-100-400-D1A1 simplifies installation while delivering the reliable performance required for high-end architectural, retail, and gallery lighting. This driver is an essential component for any advanced Ltech Control System installation.

0-10V CC Driver Special for magnetic & linear lamp MT-100-400-D1A1

Key Features

Optimized for Magnetic & Linear Lights

Specifically designed for quiet magnetic installation and seamless integration with linear lighting systems.

Versatile 0-10V & 1-10V Dimming

Automatically identifies and adapts to both 0-10V and 1-10V dimming signals for broad compatibility.

Selectable Constant Current Output

Features multiple output current settings between 100mA and 400mA to precisely match your LED load.

Flicker-Free Performance

Delivers an exceptionally smooth dimming curve from 0% to 100% without any visible flicker or noise.

Simplified Installation

Features non-polarized inputs, hot-pluggable connections, and compatibility with STUCCHI standard housings.

Robust Safety Protections

Equipped with short circuit, overload, no-load, and anti-reverse protections for maximum reliability and safety.

Technical Highlights

DC to DC constant current output ensures stable and consistent light quality.
Engineered for silent magnetic mounting, eliminating audible high-frequency buzzing.
Input and output connections support hot-plugging for easier on-site adjustments.
Compact form factor is designed to fit perfectly within standard STUCCHI housings.

Product Specifications

Parameter	Details
Model	MT-100-400-D1A1
Brand	Ltech
Dimming Protocol	0-10V / 1-10V (Auto-identifying)
Output Type	Constant Current (CC)
Output Current	Multiple selectable settings (100-400mA range)
Input Type	DC
Input Polarity	Non-Polarized
Specialty	Magnetic & Linear Lamp Systems
Housing Compatibility	STUCCHI Standard Housings
Performance	Flicker-free, quiet operation
Hot-Plug Support	Yes (Input & Output)
Protections	Short circuit, overload, no-load, anti-reverse

Application Scenarios

Architectural & Commercial Lighting Perfect for creating sophisticated accent lighting in modern offices, lobbies, and high-end residential spaces using linear fixtures. Its quiet operation makes it ideal for noise-sensitive environments.

Retail & Gallery Displays Power magnetic track lighting to highlight products or artwork with precision. The smooth, flicker-free dimming ensures that merchandise and exhibits are always presented in the best possible light, from subtle to bright.

Custom Linear Fixtures An essential component for custom-built linear lighting profiles and integrated cove lighting. Its compact size and STUCCHI housing compatibility allow for discreet installation inside channels and enclosures.

How to Install & Use This 0-10V Driver

Ensure all power is disconnected before beginning installation.
Select the desired constant current output using the DIP switches on the driver. Refer to the product datasheet (in the Downloads section) for specific settings.
Connect the low-voltage DC power source to the driver's input terminals. Thanks to the non-polarized design, the positive and negative wires can be connected to either terminal.
Connect the signal wires from your 0-10V or 1-10V wall dimmer or control system to the DIM+ and DIM- terminals.
Connect the driver's output wires to your magnetic track system or linear LED lamp, ensuring correct polarity (+ to +, - to -).
Mount the driver in a suitable location. The magnetic base allows for easy attachment to ferrous metal surfaces.
Restore power and test the full range of dimming to ensure smooth operation.

⚠ Precautions

Ensure the connected LED fixture is designed for constant current operation and its required current falls within the 100-400mA range of this driver.
Do not exceed the maximum load capacity of the driver.
This is a constant current driver, which operates differently from a constant voltage model. Using it with incompatible LEDs can cause damage.

What's in the Box

✓1x MT-100-400-D1A1 0-10V Constant Current LED Driver

⇩ Downloads & Documents

PDFMT-100-400-D1A1

Frequently Asked Questions

Q: What makes this driver special for magnetic and linear lamps?

A:It's designed for quiet magnetic installation without high-frequency buzzing and is shaped to fit within standard STUCCHI housings used in many linear and track systems.

Q: Can I use this with a 1-10V dimmer?

A:Yes, this driver automatically detects both 0-10V and 1-10V dimming signals, making it compatible with a wide range of control systems.

Q: How do I set the output current?

A:The output current is set using physical DIP switches on the driver's housing. Please refer to the datasheet for a guide to the switch positions for each current level.

Q: What does 'no input polarity' mean?

A:It means you can connect the positive and negative DC input wires to either input terminal without risk of damage, which simplifies and speeds up installation.

Q: Is this a constant current or constant voltage driver?

A:This is a constant current (CC) driver. It is crucial to pair it with LED fixtures that are designed to be driven by a constant current source.

Q: Does this driver support hot-plugging?

A:Yes, both the input and output connections support hot-plugging, allowing for more flexible installation and maintenance, though we always recommend disconnecting power as a best practice.

0-10V CC Driver Special for magnetic & linear lamp MT-100-400-D1A1