| Select Kit: | Neon Tube (Base), Neon Tube + Clips |
|---|---|
| Select Length: | 3.28ft (1 meter) (Base), 16.4ft (5 meters), 6.56ft (2 meters) |
| Select PCB Width: | 10mm (0.39in) (Base), 12mm (0.47in) (Base) |
| Select Roll Type: | Several Rolls (Base), a Whole Roll without cut (Base) |
| Type of End Caps: | With Hole (Base), No Hole (Base), Half With Hole + Half No Hole (Base) |
| Availability | In Stock |
| Condition | Brand New |
Silicone led diffuser for 10mm and 12mm led strip lighting, the light refracted from the light source through the conduction of silicone diffuser to produce the ultimate lighting effect which is more artistic and practical. LED silicone channel is mainly matched with LED strip to achieve good lighting effect, the combination of bright LED light strips and the silicone led channel can achieve a dotless light effect, smooth led light.
Made of high quality silicone material, the silicone led diffuser channel is flexible and bendable, has good light transmittance and a large light-emitting angle, it does not change yellow or crack, waterproof grade is IP67 and above; it has superior performance of ozone resistance, cold resistance, high or low temperature resistance, and is widely used in decorative lighting and sign lighting.
Product Specification
Model: FLNLT-T2014
Material: Food-grade Silicone
Dimensions: 20mm/0.79" x 14mm/0.55"
PCB Width: 10mm, 12mm
Length: 5m/2m/1m
Beam Angle: 120°
Lighting Direction: Top Lighting
Waterproof Rating: IP67
Working Temperature: -50°C to 200°C
UV Resistant: Yes
Note:
The product does not include led light strips.
If you buy our LED strips at the same time, we can make LED neon lights for you for free. You only need to make a note when ordering.
If you insist on completing the production of neon lights by yourself, you can read: How To Put A Flexible LED Strip Light Into A Silicoen Tube?
We are not responsible for any damage caused by your own operation!
Flex LED Neon Tube Installation:
There are three installation methods for neon silicone tubes, one is to install with mounting clips, easy operation. 1m silicone tube for led strip lights has two mounting clips, 2m has four, and 5m has ten.
The second is to put the flex led neon tube into the aluminum channel, this installation method is suitable for linear lighting projects.
And the third is to use flexible profiles for curved path lighting, which has great bending freedom.
