| Select COB Type: | 5V Slim 5mm 160/m (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Power: | 12-13W/m (Input JST + Output JST) (Base), 20W/m (Input JST + Output Power Wire), 12W/m (Input JST + Output Power Wire) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Transparent Heat Shrink Tube IP67, Transparent Heat Shrink Tube IP67 (Waterproof Wires) |
| Availability | In Stock |
| Condition | Brand New |
WS2812B (WS2812) ture individually addressable COB (chip-on-board) RGB led strip light 5m/16.4ft reel, the entire PCB is covered by a silicone diffusion layer. LED light-emitting chips are directly packaged on the PCB, so it can integrate 60, 100, 160, 240 LEDs on the 2.7mm, 5mm, 10mm tape per meter. These Fcob RGB lights are controlled by WS2812 ICs, compatible with SPI LED controller to output 16 million color changes, dynamic color tracking and static arbitrary adjustment to control the color change speed and brightness of the LED light strip, to meet your most extreme demands.
These addressable COB led strip supports DC5V and DC12V low voltage input, safe and efficient. For outdoor environmental lighting, we have developed an IP67 waterproof LED light strip that can withstand sprays and splashes from all directions. It cannot be immersed in water, but it can withstand various factors. You can purchase waterproof LED extension wire to complete your outdoor cob solutions.
Please select the correct connector option: If you select IP20 or IP67 (without the words “waterproof wire”), the corresponding connector will be provided by default; if you select IP67 (waterproof wire), a waterproof cable will be provided, not a JST connector.
Various Options You Can Choose:
| Volt | PCB Width | LED Qty | IC Qty | Power | Cut |
|---|---|---|---|---|---|
| 5V | 5mm | 60/m, 300/roll | 60/m, 300/roll | 10 w/m | 16.6mm |
| 5V | 5mm | 100/m, 500/roll | 100/m, 500/roll | 7.5 w/m | 10mm |
| 5V | 5mm | 160/m, 800/roll | 160/m, 800/roll | 12 w/m | 12.5mm |
| 5V | 2.7mm | 160/m, 800/roll | 160/m, 800/roll | 12 w/m | 12.5mm |
| 5V | 10mm | 160/m, 800/roll | 160/m, 800/roll | 20 w/m | 12.5mm |
| 12V | 5mm | 160/m, 800/roll | 160/m, 800/roll | 10 w/m | 12.5mm |
| 12V | 5mm | 240/m, 1200/roll | 240/m, 1200/roll | 7.5 w/m | 12.5mm |
Due to the low 5-volt supply, the LED will only function properly for lengths of 1 to 2 meters. Significant voltage drop will occur over 5-meter lengths—please take this into account. Carefully calculate the total required COB length and IC pixel count, then select an appropriate power supply and control system based on these specifications.
Product Specification
LED Strip Type: DreamColor COB RGB LED Strips
LED Chip: SMD1022 Epistar Chip
IC Type: WS2812B
LED Quantity: 5V Slim 5mm 160/m, 5V Slim 5mm 100/m, 12V Slim 5mm 160/m, 12V Slim 5mm 240/m
Strip Length: 5m 16.4ft
Strip Height: 2.5mm
Luminous Flux: 2-3 lumens/ LED
Beam Pattern: 180 degree
Water Proof: Non-Waterproof IP20, Waterproof IP67
Working Temperature: -4°F (-20°C) ~ 122°F (50°C)
Storage Temperature: -40°F (-40°C) ~ 176°F (80°C)
