| Select Length: | 3.28ft (1 meter) (Base) |
|---|---|
| Select PCB Color : | 12mm Black Background, 8mm Black Background (Base), 8mm White Background, 10mm White Background |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
The SK6812 RGB 144LEDs/m side emitting addressable LED strip light 1m per roll is thin and easy to install inside the gap with the light parallel to the PCB board. A variety of dynamics can be presented through an SPI controller. Comes with a 3M double-sided tape. To power this strip, you need a 5V power supply. There is no voltage drop when powering the side-emitting led strip at one end. Goog color consistency.
Advantages
Super long life, and good wire conductivity.
Using 4020 high-brightness lamp beads, low-voltage high-brightness without stroboscopic.
Flexible cutting (single LED can be cut): each 6.9mm has a cutable mark, each lamp bead contains a built-in IC, which is individually addressable, each LED can be cut, and the large pad is convenient for secondary use.
A variety of waterproof options, the waterproof casing is made of high-quality PVC outsourcing rubber material, with high light transmittance, pressure resistance, abrasion resistance and high temperature resistance.
Three-core light-emitting design, high-precision double solder joints and large-width PCB circuit board, perfect light effect, stable and non-glaring light.
SK6812 Chips Specifications Download 
Standards and Certifications
Specifications
| LED Type: SMD4020 Side-Emitting RGB LED Strip |
| IC Type: SK6812 (built inside the 4020 side-emitting SMD RGB LED) |
| Working Voltage: DC5V |
| Power: 28.8W/m |
| Lumen/LED: 14lm/LED |
| Product Dimention: L100cm(39 in ) x W0.8cm(0.3 in ) x H0.25cm(0.1 in ) |
| Waterproof Rating: IP20/IP67 |
| Lifespan: 50,000Hours+ |
| Terminal Wire Length: 120mm |
| Certification: UL, CE, EMC, ISO, ROHS |
| Pixels: 144/meter(1 IC drives 1 LED) |
| Density: 144 LEDs/m |
| Lumen/Meter: Red(149lm), Green(398lm), Blue(91lm) |
| FPCB Color: White |
| Working Temperature: -25℃~60℃ |
| Cuttable Length: 6.9mm/0.31in(Every LED is cuttable) |
| Beam Angle: 120 degree |
| LED Color: Full color RGB |
Package List:
1m/3.28ft led strip light with JST connectors at two sides.
How to connect and control
Similar to WS2812B LED strip, the SK2812 led strip has 3 wires for sending data (one V+ pin, one GND pin, and one data pin). That means you need 3 pins to control the strip. Because the data is separated, you can use any processor speed or type to control these strips. an addressable RGB LED strip is a long flexible strand of LEDs each of which can be individually set to a certain color (hence: addressable). By varying the level of red, green and blue (RGB) per LED many color combinations can be made you can use any processor speed or type to control these strips, you can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip.
Related reading: How to wire addressable led strips?
Applications
These digital Addressable LED Strips are Applicable to people who would like to pursue fashion and romance, for individual creativity and the new apartment decoration, as its soft, light and thin features very suitable for DIY personal space.
LED programmable digital display
Hotels decoration use
Backlighting decoration
Concealed lighting, Cove decoration
Theaters, clubs, shopping malls lighting
Architectural decorative lighting
Boutique atmosphere lighting
Auditorium walk stairway lighting
Hidden groove, Wine cabinet decoration
Show exhibition decoration
