Spec Sheet - RGB-ACCESSORIE-COB-L

Availability	In Stock
Condition	Brand New

Achieve flawless 90-degree corners in your lighting projects with the 4-Pin L-Shape 10mm RGB COB LED Corner Connector. Specifically engineered for the unique design of modern RGB COB LED strips, this connector eliminates the need for soldering, making it easy to create clean, professional-looking turns. Bending a COB strip sharply can damage the delicate chips and phosphor coating, but this L-shape connector provides a safe and reliable bridge. It ensures perfect electrical continuity for all four RGB channels, maintaining consistent color and brightness around corners in applications like under-cabinet lighting, cove installations, and retail displays. This is one of the essential LED light strip accessories for a polished finish.

Key Features

Engineered for COB Strips

Designed to pierce the phosphor coating and make a secure connection with the specific circuitry of 10mm wide RGB COB LED strips.

Solderless 90° Turns

Create perfect right-angle corners in seconds without any soldering, ideal for DIYers and professional installers alike.

Reliable 4-Pin Connection

Maintains a strong, stable connection for all Red, Green, Blue, and positive channels, preventing color flickering or signal loss.

Seamless & Clean Installation

Eliminates awkward folds or gaps, allowing your light strip to run smoothly around corners for a continuous, uniform appearance.

Technical Highlights

Transparent housing allows you to visually confirm the strip is properly seated before closing the clasp.
Metal contact points are designed to create a firm, reliable connection that withstands minor vibrations.
Ensures consistent power and signal integrity across all 4 RGB channels without voltage drop at the connection point.

Product Specifications

Parameter	Details
Product Model	RGB-ACCESSORIE-COB-L
Product Type	L-Shape Corner Connector
Compatible Strip Type	10mm 4-Pin RGB COB LED Strips
Number of Pins	4
Strip Width	10mm
Connection Method	Solderless, Snap-down
Material	Plastic, Metal
Waterproof Rating	IP20 (Non-waterproof)
Application	For making 90-degree corner connections

4 pin L shape 10mm rgb cob led strip connector — The 4-Pin L-Shape Connector for 10mm RGB COB LED Strips.

Application Scenarios

Under-Cabinet & Kitchen Lighting Navigate the sharp corners of kitchen counters and cabinets with ease, providing continuous, dotless illumination exactly where you need it.

Cove & Architectural Lighting Perfect for outlining rectangular ceilings, soffits, or architectural features, ensuring a clean line of light without any dark spots at the corners.

Retail & Display Case Lighting Create perfectly framed lighting for display shelves, jewelry cases, and retail fixtures to highlight products from all angles.

Task & Bookshelf Lighting Route COB strips around the inner frame of bookshelves or along the back of a desk, maintaining a professional and tidy installation.

How to Use This Corner Connector

Ensure your LED strip is powered off before starting.
Cut your 10mm RGB COB strip neatly along the designated cut line.
Open the transparent clasps on both sides of the L-shape connector.
Carefully slide the end of one COB strip segment into one side of the connector, making sure it goes underneath the metal contact pins. Ensure the polarity markings (+, R, G, B) on the strip align with the corresponding channels on the connector.
Firmly press down the clasp until it clicks shut, securing the strip in place.
Repeat steps 4 and 5 for the second COB strip segment on the other side of the connector.
Briefly power on the strip to test the connection and ensure all colors display correctly before final installation.

⚠ Precautions

This connector is designed exclusively for 10mm wide, 4-pin RGB COB LED strips. It is not compatible with SMD strips, narrower/wider strips, or strips with a different pin count (e.g., RGBW).
This is an IP20 non-waterproof connector and should only be used in dry, indoor locations.
Always double-check the polarity alignment (+ to +, R to R, etc.) before closing the clasps to prevent incorrect color mixing or damage to the strip.

What's in the Box

✓1 x 4-Pin L-Shape 10mm RGB COB LED Corner Connector

Frequently Asked Questions

Q: Will this connector work with standard 5050 or 2835 RGB SMD LED strips?

A:No, this connector is specifically designed for the unique structure of RGB COB LED strips. For SMD strips, please use our standard SMD connectors.

Q: Is this connector waterproof for outdoor use?

A:This is an IP20 rated connector, meaning it is not waterproof. It is intended for use in dry, indoor environments only.

Q: Do I need any special tools for installation?

A:No tools are required. This is a solderless connector with a simple snap-down clasp mechanism for a secure, tool-free installation.

Q: What happens if I install the strip backwards?

A:If the polarity is not aligned correctly (+, R, G, B), the colors will not display as expected or the strip may not light up. Always match the markings on the strip to the connector before closing the clasp.

Q: Can I use this for 5-pin RGBW or 6-pin RGBCCT COB strips?

A:No, this is a 4 pin led connector designed only for 4-pin RGB strips. You will need a 5-pin or 6-pin connector for RGBW or RGBCCT strips, respectively.

Q: Are these sold in packs?

A:This connector is sold individually. You can add your desired quantity to the cart to purchase multiple units for your project.