DC12/24V Bluetooth Motion Sensor Stair Side Wall & Step Light LED Controller, Main Wire Version

This controller allows you to mount the linear strip lights under each step and into the side walls or below the handrail, creating a continuous light of illumination. 

It adapts 3-pin addressable white led strips and single color led strips, controlled by Bluetooth, to achieve smart control with a mobile phone. Max control 1024 pixels. Each step light power can not exceed 24W (for 12V) or 30W (for 24V). 

There is a main wire to connect all the step led strip lights in a easier way. Equipped with two motion sensors to automatically detect your movement, and then the stair lights will automatically turn on and turn off. 

1. Use with DC12V/24V 3-pin digital led strips. 

2. Power by an AC110V/220V to DC12V/24V led transformer. Choose the one with enough capacity. 

3. Use WeChat to scan the code to enter the control page. 

Default one LED controller and 2 sensors, no mainline. Select your number of steps and you will receive one controller, 2 sensors, and a main line.

Please note that you need to weld the split controls to the led strip lights by yourself. (Please refer to the wiring guide image below)

Conventional wiring VS upgraded wiring

Conventional wiring: Each step needs a separate wire to connect to the controller, the wiring is complicated.

Upgraded wiring: One main wire connects all the step lights, easy to install. 

Standards and Certifications