Spec Sheet - SC-ACCESSORIES-L

Availability	In Stock
Condition	Brand New

Create clean, professional 90-degree turns in your lighting layout with the SuperLightingLED 2-Pin L-Shape Corner Connector. Specifically designed for 10mm wide single color LED strips, this essential accessory eliminates the need to bend or fold your strip, which can cause damage and inconsistent lighting. The solderless design allows for a quick and secure connection, making it the perfect solution for navigating corners in under-cabinet lighting, display cases, and cove lighting projects. This led strip corner connector ensures a continuous, reliable flow of power, maintaining uniform brightness around every bend. It's an indispensable tool for achieving a flawless, high-end finish in any custom LED strip installation.

Key Features

Perfect 90° Corners

Achieve sharp, clean right-angle turns without bending or damaging your LED strip, ensuring a professional installation.

Solderless Snap-On Design

Features easy-to-use clasps that securely lock the strip in place, creating a reliable connection without any soldering or special tools.

Precise Compatibility

Engineered exclusively for 2-pin, 10mm wide single color LED strips, guaranteeing a perfect fit and optimal electrical contact.

Seamless Power Flow

Maintains a stable and continuous electrical circuit around corners, preventing voltage drops or flickering for consistent illumination.

Technical Highlights

Creates seamless 90° corner connections for LED tape.
Solder-free, snap-tight installation process.
Designed specifically for 10mm wide 2-pin single color LED strips.
Durable plastic housing with conductive copper contacts.

2 pin L shape led corner connector for 10mm single color led strips — The 2-pin L-shape solderless corner connector for 10mm single color LED strips.

2 pin L shape led corner connector for 10mm single color led strips - view 2 — Demonstrating a clean 90-degree turn using the L-shape corner connector.

Product Specifications

Parameter	Details
Product Model	SC-ACCESSORIES-L
Product Type	L-Shape Corner Connector
Shape	90-Degree Right Angle
Pins	2
Compatible Strip Width	10mm
Compatible Strip Type	Single Color LED Strips
Connection Method	Solderless, Clip-on
Housing Material	Plastic
Contact Material	Copper
Housing Color	White
Voltage Compatibility	Low Voltage DC (5V, 12V, 24V)
IP Rating	IP20 (Indoor Use Only)

Application Scenarios

Under Cabinet Lighting Perfect for routing LED strips around the corners of kitchen cabinets and countertops. This L-shape connector ensures your workspace is evenly lit without any dark spots or awkward bends in the light strip.

Architectural Cove Lighting Create flawless, continuous lines of light in ceiling coves, soffits, and other architectural features. The connector allows you to easily follow the sharp angles of a room for a seamless, built-in look.

Retail and Display Shelving Ideal for outlining display cases, retail shelving, or picture frames. This 2 pin led connector helps create a clean, professional frame of light that draws attention to your products or artwork.

How to Use This L-Shape Corner Connector

Ensure your power supply is disconnected before installation.
Carefully cut your LED light strip along the designated copper cut line.
Open the white clasps on both sides of the L-shape connector.
Gently slide one end of the LED strip into one side of the connector, ensuring the strip's copper pads are underneath the connector's metal pins.
Firmly press down and snap the clasp shut. You should feel a click as it locks.
Repeat steps 4 and 5 for the second strip segment on the other side of the connector.
Double-check that the polarity markings (+ and -) on both strips are aligned correctly.
Reconnect your power supply and test the connection to ensure the lights turn on.

⚠ Precautions

This connector is designed ONLY for 10mm wide, 2-pin single color LED strips. It is not compatible with 8mm strips, RGB, RGBW, or other multi-pin strips.
Incorrect polarity will prevent the strip from lighting up. Always align the '+' and '-' markings.
This product has an IP20 rating and is not waterproof. Use only in dry, indoor locations.
Ensure the total current of your LED strip does not exceed the maximum amperage rating of the connector (typically 3-5A).

What's in the Box

✓1 x 2 Pin L-Shape LED Corner Connector (Model: SC-ACCESSORIES-L)

Frequently Asked Questions

Q: Will this led corner connector work with my RGB or RGBW LED strip?

A:No, this is a 2-pin connector specifically designed for single color LED strips. For multi-color strips, you will need a connector with more pins (e.g., 4-pin for RGB).

Q: Is this compatible with 8mm or 12mm wide LED strips?

A:No, this connector is precisely engineered to fit 10mm wide PCB strips. Using it with other sizes will result in a poor or non-existent connection.

Q: Do I need to solder anything to use this connector?

A:No, this is a completely solderless connector. It uses a secure clip-on mechanism for a fast and easy installation.

Q: How do I make sure the polarity (+/-) is correct?

A:Most LED strips have '+' and '-' markings printed on them. Simply ensure these markings on your strip align with the corresponding side on both ends of the connector.

Q: Can I use this led strip connector 2 pin for an outdoor project?

A:This connector is not waterproof and is intended for indoor, dry locations only. For outdoor applications, you would need a waterproof-rated connector.

Q: Why do I need this instead of just bending the strip?

A:Bending an LED strip sharply at a 90-degree angle can damage the circuit board and the LEDs, leading to flickering or dead sections. This connector provides a safe and reliable way to make sharp turns.

2 Pin L-Shape LED Corner Connector For 10mm Single Color LED Strips