Can I use this for RGB or addressable COB strips?

No, this is a 2-pin connector designed exclusively for single-color or 2-wire CCT (tunable white) COB LED strips. It does not have enough conductors for multicolor or addressable strips.

Is this connector waterproof?

No, this connector has an IP20 rating, meaning it is for indoor use in dry locations and is not protected against moisture.

Spec Sheet - SC-ACCESSORIES-COB-STW

Select PCB Width:	8mm (0.31in) (Base), 10mm (0.39in) (Base), 5mm (0.2in) (Base)
Availability	In Stock
Condition	Brand New

Create a secure, reliable power connection for your dotless lighting projects with our 2-Pin Strip-to-Wire Connector, specifically engineered for single-color and white COB LED strips. This connector bridges the gap between your COB strip and its power source, eliminating the need for soldering. Unlike typical snap-on connectors, this model features a robust insulation-piercing design. By using a simple pair of pliers, the metal contacts are crimped down, piercing the strip's solder pads to establish a firm, long-lasting electrical bond. Available in 5mm, 8mm, and 10mm widths, it's the ideal solution for custom installations, repairs, and any project where a dependable, solder-free connection is essential. It's also compatible with 2-wire CCT COB LED strips.

Key Features

Engineered for COB Strips

Specifically designed to match the unique circuit layout and solder points of 2-pin single-color and 2-wire CCT COB LED strip lights.

Secure Piercing Connection

Utilizes an insulation-piercing mechanism that requires pliers to crimp, creating a much stronger and more reliable electrical connection than standard clip-on types.

Multiple Width Options

Available in 5mm, 8mm, and 10mm sizes to ensure a perfect fit for your specific COB strip's PCB width.

Solder-Free Installation

Simplifies wiring by creating a direct strip-to-wire link without any soldering, ideal for quick field installations and repairs.

Ready-to-Use Pigtail

Includes an attached 15cm (5.9") red/black wire pigtail, ready to be connected to a power supply or single color dimmer.

Product Specifications

Parameter	Details
Product Model	SC-ACCESSORIES-COB-STW
Product Type	Strip-to-Wire COB Connector
Pin Count	2-Pin
Available PCB Widths	5mm (0.2in), 8mm (0.31in), 10mm (0.39in)
Wire Length	15cm / 5.9 inches
Compatible Strip Types	IP20 Single Color COB LED Strips, 2-Wire CCT COB LED Strips
Connection Method	Insulation Piercing (Requires Pliers)
Housing Material	Plastic
Contact Material	Copper
IP Rating	IP20 (Non-waterproof)

Application Scenarios

Under-Cabinet and Shelf Lighting Perfect for connecting segments of COB LED strips under kitchen cabinets, bookshelves, or retail shelves to a central power source. The secure crimp ensures connections won't come loose in tight spaces.

Architectural Cove and Accent Lighting Ideal for creating custom-length power leads for COB strips used in architectural coves, display cases, or for backlighting. This connector provides a clean, professional termination point for your wiring.

DIY LED Projects and Quick Repairs An essential component for hobbyists and installers. Quickly repair a damaged strip end or build custom linear lighting fixtures using COB technology without the hassle and equipment of soldering.

How to Use This COB Strip Connector

Select the connector size (5mm, 8mm, or 10mm) that matches the PCB width of your COB LED strip.
Carefully slide the end of the COB strip into the connector's slot.
Ensure the round copper solder pads on the strip are perfectly aligned with the metal piercing pins inside the connector.
Using a pair of pliers, apply firm and even pressure to press down the metal contacts on the connector. You will feel them lock into place as they pierce the strip's circuit board, creating a secure connection.
The connection is now complete. Connect the red (+) and black (-) wires to your corresponding single color dimmer or power supply.

⚠ Precautions

This is a permanent, one-time use connector. Once crimped, it cannot be reliably removed and reused.
Always disconnect the power source before making any electrical connections.
This connector is designed for IP20 non-waterproof COB strips only and should be used in dry, indoor locations.
A firm, even pressure with pliers is required for a successful connection. Attempting to press with fingers alone will not create a reliable contact.

What's in the Box

✓1 x 15cm Strip to Wire 2-Pin COB LED Connector (in selected PCB width)

Frequently Asked Questions

Q: Do I need to solder with this connector?

A:No, this is a solderless connector. It uses a special insulation-piercing mechanism that requires a pair of pliers to crimp and create a secure connection.

Q: Will this work with standard SMD LED strips like 5050 or 2835?

A:This connector is specifically designed for the circuitry and solder pad layout of COB LED strips. It is not recommended for use with standard SMD strips as the pin alignment will not match.

Q: What tools do I need for installation?

A:You will need a pair of standard pliers to firmly crimp the metal contacts, which pierces the LED strip's PCB to establish a connection.

Q: How do I choose the correct size for my strip?

A:Measure the width of your COB LED strip's printed circuit board (PCB), not the lighted area. Then select the matching connector size: 5mm, 8mm, or 10mm.

5mm/8mm/10mm 15cm Strip to Wire 2-Pin COB LED Connector