Is this connector truly solderless?

Yes, it is completely solderless. It uses an insulation-piercing clamp mechanism to create the electrical connection, eliminating the need for a soldering iron.

Can I use this for waterproof LED strips?

No, this connector is designed exclusively for IP20 non-waterproof LED strips. Using it with waterproof strips that have a silicone coating will result in a poor or failed connection.

Spec Sheet - RGBW-SMD-STS

Q: Will this work with my high-density strip (120 LEDs/m)?

Absolutely. This connector is specifically designed with a compact profile that does not block LEDs, making it ideal for high-density RGBW strips up to 120 LEDs per meter.

Apply to:	Low-Density RGBW Tape Light (Base), Ultra-High-Density RGBW Tape Light (Base)
Select PCB Width:	10mm (0.39in) (Base), 12mm (0.47in) (Base)
Select Type:	Connector - Strip to Strip (Base), Connector - Strip to Wire (Base), Strip to Wire Connector + 10CM Wire
Availability	In Stock
Condition	Brand New

Create clean, reliable, and solder-free connections for your most demanding lighting projects with the RGBW-SMD-STS 5-Pin Clamp-Down Connector. Specifically engineered for modern RGBW SMD LED strip lights, this connector utilizes an insulation-piercing mechanism to ensure a solid electrical bond, even on ultra-high-density strips where solder pads are minimal. Forget the hassle of soldering in tight spaces; this connector forms a secure link with the simple press of a pair of pliers. Available in multiple configurations—including strip-to-strip and strip-to-wire—and compatible with both 10mm and 12mm wide PCBs, it's the professional's choice for custom-length installations, repairs, and extensions of both low-density (60-72 LEDs/m) and high-density RGBW tape light (84-120 LEDs/m).

5 Pin SMD LED Strip RGBW Connector For 12mm High-Density Tape Lights

Key Features

Solderless Clamp-Down Design

Features sharp piercing pins that create a secure, reliable connection by penetrating the strip's PCB or wire insulation with a simple squeeze of pliers.

High-Density Strip Compatible

The compact, 'no block' design ensures the connector does not obstruct any LEDs, making it perfect for ultra-high-density strips from 84 up to 120 LEDs per meter.

Versatile Options

Choose from 10mm or 12mm PCB widths and select Strip-to-Strip for joining segments or Strip-to-Wire for connecting to a power supply or controller.

Broad Application

Fully compatible with a wide range of 5-pin RGBW strips, from standard low-density (60 LEDs/m) to high-performance versions.

Technical Highlights

Designed for IP20 non-waterproof RGBW LED strips.
Clear housing allows for visual confirmation of proper strip alignment.

Product Specifications

Parameter	Details
Product Model	RGBW-SMD-STS
Pins	5
Connection Method	Solderless, Clamp-Down (Pliers Required)
Connector Type	Strip-to-Strip, Strip-to-Wire, Strip-to-Wire with 10cm Wire
Compatible PCB Width	10mm (0.39in), 12mm (0.47in)
Compatible LED Strip	5-Pin RGBW SMD LED Strips (IP20 Non-Waterproof)
Compatible LED Density	Low Density (60-72 LEDs/m) & High Density (84-120 LEDs/m)

Application Scenarios

Custom Under-Cabinet and Cove Lighting Perfect for creating custom-length runs of RGBW lighting in kitchens, display cases, and architectural coves. The strip-to-strip connectors allow you to seamlessly navigate corners and gaps, while the strip-to-wire options make connecting to your RGBW controller simple and clean.

On-Site LED Strip Installation and Repair An essential tool for professional installers. Quickly join sections or repair damaged segments of high-density RGBW tape light on the job site without needing a soldering iron, saving time and ensuring a durable connection.

How to Use This Connector

Ensure your LED strip is compatible (5-Pin, 10mm or 12mm width, IP20) and cut it cleanly along the designated cut line.
Carefully slide the end of the LED strip into the connector, ensuring the five copper pads on the strip align perfectly with the five metal pins inside the connector.
For Strip-to-Wire types, insert the 5 individual wires into their respective channels.
Using a pair of pliers (such as slip-joint or channel-lock pliers), apply firm, even pressure directly on top of the connector cover. The pins will pierce through the PCB or wire insulation to make contact.
Tug gently on the strip and wire to confirm a secure connection has been made before powering on.

⚠ Precautions

These connectors are intended for use with IP20 non-waterproof LED strips only.
Always double-check the polarity alignment (+, R, G, B, W) before closing and clamping the connector.
Do not apply excessive force with the pliers, as this may damage the connector or the LED strip.
This is a one-time use connector; once clamped, the piercing connection is permanent.

What's in the Box

✓1x 5-Pin SMD LED Strip RGBW Connector (in your selected type and width)

Frequently Asked Questions

Q: What tools do I need to use this connector?

A:You will need a pair of standard pliers to press the connector shut. This action drives the pins through the strip's circuit board to establish a secure connection.

Q: Will this work with my high-density strip (120 LEDs/m)?

A:Absolutely. The ultra-high-density version of this connector is specifically designed with a compact profile that does not block LEDs, making it ideal for high-density RGBW strips up to 120 LEDs per meter.

Q: How do I choose between the 10mm and 12mm versions?

A:Measure the width of your LED strip's PCB (the bare board, not including any coating). Choose the connector size that matches your strip's PCB width to ensure a proper fit.

Q: What is the difference between Strip-to-Strip and Strip-to-Wire connectors?

A:A 'Strip-to-Strip' connector is used to join two separate lengths of LED strip together to create a longer, continuous run. A 'Strip-to-Wire' connector is used to connect the end of an LED strip to a 5-pin wire, which then connects to your power supply or controller.