| Availability | In Stock |
|---|---|
| Condition | Brand New |
Typical application 1: used as a switch
Turns on the light upon detection of motion, and turns off after a pre-selected hold time when there is no movement.
Typical application 2: used as a switch with two-step dimming
Turns on the light upon detection of motion, after a pre-selected hold time, dim to 20% brightness, and turns off after a pre-selected standby time when there is no movement.
Typical application 3: used as a dimmer
Turn on the light and dim up to the expected brightness level upon detection of motion, and turns off after a pre-selected hold time when there is no movement.
Features
● Ceiling mounting microwave motion detectors with HF system 10.525GHz, built-in daylight sensor.
● Output 1 channel 0/1-10V signal, connect with 0/1-10V dimmable LED driver.
● High voltage AC input, High voltage AC relay output with zero-cross detection.
● Can work as RF remote, output RF 2.4G signal, matched with RF LED controller or
RF dimmable LED driver.
● Detection area, time delay, and light threshold can be set via the knob potentiometer.
EH-M Manual Download 
Standards and Certifications
Product Specification
| Model: | EH-M |
| Working voltage: | 100-240VAC |
| Output signal: | 0/1-10V (Max.30mA), RF 2.4GHz |
| Output current: | Max 4A (AC) |
| HF system: | 10.525GHz |
| Power consumption: | <1.6W (Operation) |
| Detection zone: | Max.(DxH) 20 x 10m |
| Detection sensitivity: | 10%/25%/50%/75%/100% |
| Hold time: | 10s/30s/90s/3min/10min/30min/+∞ |
| Stand-by time: | 0s/30s/90s/3min/10min/30min/+∞ |
| Daylight threshold: | 10lux/30lux/50lux/100lux/150lux/200lux/Disable |
| Expected light: | 50lux/100lux/150lux/200lux/250lux/300lux/400lux |
| Mounting height: | 10m Max |
| Motion detection: | 0.5-3m/s |
| Detection angle: | 360°(ceilling installation) |
| Operation temperature: | Ta: -20℃~ +50℃ |
| IP rating: | IP20 |
| Warranty: | 5 years |
