Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 5536

4 Pin 10mm High-Density RGB LED Strip to Wire Type Solderless Connector

MODEL: RGB-SMD-STW
Price based on selections below:
$0.99
Apply to:IP20 Bare PCB Boards (Base)
Select PCB Width:8mm (0.31in) (Base), 10mm (0.39in) (Base)
Select Type:Connector + Wire, Connector Only (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Achieve clean, reliable terminations for your lighting projects with the 4 Pin High-Density RGB LED Strip to Wire Solderless Connector. This innovative connector provides a robust, solder-free solution for connecting your 4-pin SMD RGB flexible LED strip lights to a power source or controller. Its unique piercing mechanism ensures a solid electrical contact by penetrating the PCB, making it a superior choice for professional and DIY installations alike. Designed specifically for high-density strips, its compact form factor won't obstruct nearby LEDs, preserving the uniform look of your lighting. This connector is the perfect tool for creating custom-length runs, navigating corners, or bridging gaps in your RGB lighting setup without the need for a soldering iron.

Key Features

Solderless Piercing Connection

Features sharp pins that pierce directly through the LED strip's PCB for a secure, vibration-proof electrical connection that is more reliable than typical surface-contact connectors.

High-Density Strip Compatible

The minimalist design ensures the connector does not block or cover adjacent LEDs, making it ideal for high-density RGB SMD strips (60LEDs/m, 72LEDs/m).

Broad 4-Pin Compatibility

Perfectly suited for standard 4-wire RGB LED strips and also compatible with some 4-wire dual-signal SMD addressable LED strip lights, offering versatile project application.

Customizable Options

Available for both 8mm and 10mm wide PCBs and can be purchased as a connector only or as a complete kit with pre-attached pigtail wires for maximum convenience.

Product Specifications

Parameter Details
Product Model RGB-SMD-STW
Product Type Solderless Strip-to-Wire Connector
Pin Quantity 4-Pin (for SMD)
Connection Method Insulation-Piercing Contact
Compatible PCB Width 8mm (0.31in) or 10mm (0.39in)
Compatible Strip Type IP20 Non-Waterproof (Bare PCB)
Supported Wire Gauge 20-22AWG
Housing Material Polycarbonate
Pin Material Phosphor Bronze

Application Scenarios

Custom Under-Cabinet Lighting Easily connect custom-cut lengths of RGB LED strips under kitchen cabinets, shelves, or display cases back to a central controller. This solderless led strip connector simplifies wiring around sinks, appliances, and other obstacles.
DIY Electronics & Hobbyist Projects A must-have for any project involving custom RGB lighting. Whether you're building a custom PC case, backlighting a TV, or creating unique art installations, these connectors provide a quick and professional way to wire your lighting.

How to Use This Solderless Connector

  1. Ensure your SMD LED strip is compatible (4-Pin, IP20, correct PCB width). Cut the strip cleanly along the designated cut line.
  2. Carefully slide the end of the LED strip into the connector. Align the copper pads on the strip directly under the metal piercing pins.
  3. Using a pair of pliers, apply firm and even pressure to the metal contacts on top of the connector. Press down until the pins fully pierce through the strip's circuit board. 
  4. Connect the wires to your power source or RGB controller, ensuring correct polarity (+, G, R, B). Test the connection to ensure all colors light up correctly.

4 Pin RGB SMD LED Strip Connector

⚠ Precautions
  • This connector is designed for IP20 non-waterproof SMD LED strips only. Do not use with silicone-coated or waterproof-sleeved strips.
  • Double-check the alignment of the copper pads to the pins before applying pressure to avoid damaging the strip.
  • Ensure the power is disconnected before making any connections.
  • A firm press with pliers is required to ensure the pins fully penetrate the PCB for a reliable connection.

What's in the Box

  • ✓1x 4 Pin High-Density RGB LED SMD Strip to Wire Solderless Connector (in your selected PCB width and type)

Frequently Asked Questions

Q: How do I choose between the 8mm and 10mm width options?

A:Measure the width of the bare printed circuit board (PCB) of your LED strip. Choose the connector size that exactly matches your strip's PCB width for a proper fit.

Q: What is the difference between 'Connector Only' and 'Connector + Wire'?

A:The 'Connector Only' option provides just the plastic connector piece. The 'Connector + Wire' option comes with a short pigtail of 4-conductor wire already attached, ready to be wired to your power source or controller.

© 2026 SuperLightingLED. All specifications are subject to change without notice.