WT5-M WiFi RGBCCT LED Controller Support Tuya APP Apple Home Amazon Alexa

WT5-M is currently out of stock, please contact us if you need it.

 

WiFi 5CH constant output LED controller support matter

suitable for DIM, CCT, RGB, RGBW, RGB+CCT light strips.

● Support multi-end management, Tuya APP, Apple Home, Amazon Alexa,

Google Home, Samsung Smart Things platform interconnection.

● APP remote control, support on/of light, RGB color, color temperature

and brightness adjustment, scene setting, delay turn on/off light, timer run, etc.

● Voice control, support Siri, Amazon Alexa, Google Assistant,

Tmall Genie and Xiaodu voice assistant,

but Tmall Genie and Xiaodu voice assistant only support Tuya APP.

● Match with RF 2.4G single zone or multiple zone remote control optional.

● Each WT5-M controller can also work as WiFi matter-RF converter,

then use APP to control one or more RF LED controller or RF LED dimming driver synchronously.

 

How to connect different led strip lights? here is wiring diagram blog

If you choose the kit, we will send the RT5 RF remote and WT5 panel control

 

Technical Parameters

Input and Output

Input voltage: 12-24VDC

Input current: 15.5A

Output voltage: 5 x (12-24)VDC

Output current: 5CH, 3A/CH

Output power: 5 x (36-72)W

Output type: Constant voltage

Environment

Operation temperature: Ta: -20 OC ~ +55OC

Gross weight: Tc: +85OC

Dimming data

Input signal: WiFi + RF 2.4GHz

Control distance: 30m(Barrier-free space)

Dimming gray scale: 4096（2^12）levels

Dimming range: 0 -100%

Dimming curve: Logarithmic

PWM Frequency: 1000Hz (default)

Package

Size: L120 x W43 x H35mm

Gross weight: 0.076kg

Safety and EMC

EMC standard (EMC): ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Radio Equipment(RED): ETSI EN 300 328 V2.2.2

Certification: CE, EMC, RED

Warranty and Protection:

Warranty: 5 years

Protection: Reverse polarity,

Over-heat, Short circuit

Note:

1. A smart speaker needs to be connected when using the AppleHome, Amazon Alexa, Google Home, Samsung SmartThings platform.

The smart speaker as a smart home hub is the connection center for multiple smart home devices (Matter-enabled smart home hardware products).

2. The above distance is measured in spacious (no obstacle) environment, please refer to the actual test distance before installation.

3. Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network.

4. Please keep the distance between WT5-M devices and router close, and check the WiFi signals.

 

Please download the corresponding Tuya/Smart life APP according to your region.

Push twice Match/Set key fastly, or when press and hold Match/Set key for 8-16s to set 5 kinds light type:

Clear previous network connection, enter WiFi Smart config mode, the purple LED indicator flash fastly,

the output LED will flash 10 times.

Press and hold Match/Set key for 2s:

Switch 5 kinds light type in sequence, notice this operation does not automatically clear previous network connection.

Press and hold Match/Set key for 5s:

Clear previous network connection, enter AP config mode, the purple LED indicator flash slowly.

If WiFi Smart config failed, please try AP config.

Repeat power on and off for 5 consecutive times, also clear previous network connection, enter WiFi Smart config mode, the output LED will flash 10 times.

If Tuya APP network connection succeed, the RUN LED indicator will stop flash purple, and turn corresponding light type color

(White: DIM, Yellow: CCT, Red: RGB, Green: RGBW, Blue: RGB+CCT). and in Tuya APP, you can find Matter-RGBCW device

(or other Matter-C, Matter-CW, Matter-RGB or Matter-RGBW).

 

Note:

Users can also scan the QR code on the product shell or manually enter the 11-digit setup code to connect the device