| Select Adhesive Backing: | Yellow Adhesive Tape (Base), Red Adhesive Tape |
|---|---|
| Select Input Voltage: | DC12V (Voltage Drops in White Color), DC24V (720 Chips/m), DC24V (420 Chips/m) (Base) |
| Select Kit: | LED Strips (Base), LED Strip + Controller, 10m/32.8ft kit, 5m/16.4ft kit |
| Select Length: | 16.4ft (5 meters) (Base), 32.8ft (10meters) Roll - DC24V Only |
| Availability | In Stock |
| Condition | Brand New |
WS2811 RGBIC neon LED strip light is actually an addressable RGB COB LED strip wrapped and encapsulated with heated silicone. This special design cleverly combines the advantages of both neon rope light and COB seamless LED tape, offering a versatile lighting solution. During production process, 2 color silicone are co-extruded using machinery, including a milky white silicone on the back side and a frosted silicone on the front side, which helps to better disperse the light. The surface of the silicone coating is treated with a texture oil, sleek to touch.
DC12V version with voltage drops in white color, even if you power the 12V 5m strip at both ends, it also has voltage drops under 100% brightness; if you very mind this, please use the DC24V version for your project.
Using chip on board technology, smart rgbic neon flex led strip light has a high density of 720 LEDs per meter, so it can emit high bright light evenly without any spots. WS2811 IC controls each group of LEDs, with a controller you can freely decide every LED group colors and brightness. Neon yellow color is favored by people when it comes to creating cozy bedroom ambiances.
IP67 waterproof rating allows COB silicone LED neon lights to be used outdoors. The width of this COB LED strip neon light is 12mm/0.47" and the height is 6mm/0.23". 3M adhesive backing on this strip facilitates easy installation. Peeling off the backing, you'll find shallow black lines marked on the board, indicating where to cut for precise placement.
1. COB LED strip light securely installed inside silicone neon tube, top emitting, IP67 waterproof.
2. Each WS2811 IC manages 50mm in a 12V strip and 100mm in a 24V strip, delivering dynamic RGB color changes with a controller.
3. 12V version with 100 ICs per roll and 24V with 50 ICs per roll.
4. High density of 720 LEDs per meter, smooth and clean illumination without spots or dots.
5. Cuttable LED tape light, 12v can be cut every 50mm/1.96", 24V can be cut every 100mm/3.93". We offer fast connectors to custom your project (please choose the 10mm cob type).
6. Black lines marked on board to guide your cutting (needs to remove the tape to see the shallow black lines)
7. The end of this strip comes with a 3-pin JST connector, please click here to purchase extra connectors if you need to connect strip.
For customers trying to determine correct amps power supply for COB LED lights on their own, our kit gives an accessible answer.
If select kit, you will receive SP530E controller and LRS-100-12 power supply for 12V led strip and LRS-100-24 for 24V LED lights. (only for 5m/16.4ft LED tape)
If choose 10m/32.8ft kit (only available in 24V), you will receive SP530E controller and LRS-200-24 power supply.
| LED Strip Type: | Programmable RGB WS2811 COB LED Strip Neon Rope Light |
| LED Chip: | Chip-on-board LEDs |
| IC Type: | WS2811 |
| LED Color: | Addressable RGB |
| Input Voltage: | DC24V, DC12V |
|
Power:
|
12W/m, 60W/16.4ft, 120W/32.8ft
|
| Working Temperature: | -20℃ ~ +45℃ |
| IC Pixel: |
20 ICs/m for DC12V; 10 ICs/m for DC24V |
| Height: | 6mm/0.23" |
| Width: | 12mm/0.08" (LED PCB width 10mm) |
|
LED Quantity:
|
720 Chips/m DC24V; 720 Chips/m DC12V; 420 Chips/m DC24V |
| Waterproof Rating: | IP67 |
|
Cut Length:
|
12V-50mm/1.96" cuttable, 24V-100mm/3.93" cuttable |
| Color Rendering Index: | Ra>90 |
| Beam Angle: | 120° |
| Length: | 5m/16.4ft or 10m/32.8ft per reel, 10m version only has 24V |
| Lumen: | 860 lm/m |
