| Replaced By: | DL108 |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
This DL109 4 Channel Guide Rail DALI/0-10V Dimmer has been discontiuned now, please check the DL108 Rail Type DALI Turn to 0/1-10V Dimmer, Rail Controller for replacement.
DALI (Digital Addressable Lighting Interface) is an international standard, popular lighting control protocol, With digital addressing dimming, stable, various dimming ways, easy to install, compatible with many big factories such characteristic.
This product adopts a standard DALI dimming signal to 0-10V dimming signal, dimming using standard IEC62386. LED dimming with the traditional way of comparison, with adjustable light a wide range of diverse dimming, dimming of high precision, check the current status LED (for example current brightness, power intensity , the minimum support brightness, address, etc), easy distributed control and so on.
Technical Parameters
Supply voltage: AC90V-240V
Load output: four channel 0/1V-10V signal output
Dimming signal: DALI (IEC62386)
Signal interface current: <2mA
Dimming range: 0.1%-100%
Working temperature: -20-60℃
Gross weight: 260g
Net weight: 163g
External dimension: L87mm * W72mm * H59 mm
Packing size: L100mm * W80mm * H75mm
Relay output maximum current: 2A/ each channel
External dimension
Interface description
①AC power input port; ②channel 1 relay output port; ③channel 2 relay output port; ④channel 3 relay output port; ⑤channel 4 relay output port; ②③④⑤ can provide input power for 0/1-10V dimmer, come Solve the problem that cannot be turned off;
⑥ is the DALI signal interface; ⑦ is the channel 1 0/1-10V output interface; ⑧ is the channel 2 0/1-10V output interface; ⑨ is the channel 3 0/1-10V output interface; ⑩ Channel 4 0/1-10V output interface;
Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power
2. This product use the protocol standard is IEC62386, through accept the orders sent by DALI host. It can realize to choose the output signal voltage range and dimming curve. The following is order choosing way:
A. Choose 0V-10V output, dimming curved choose linear dimming.
Controller output voltage range is 0-10V. Voltage is successive from low to high or from high to
low curved linear.
B. Choose 1V-10V output, dimming curved choose linear dimming.
Controller output voltage range is 1-10V. Voltage is successive from low to high or from high to
low curved linear.
C. Choose 0V-10V output, dimming curved choose logarithmic dimming.
Controller output voltage range is 0-10V, voltage successive from low to high or from high to
low curved logarithmic.
D. Choose 1V-10V output, dimming curved choose logarithmic dimming.
Controller output voltage range is 1-10V, voltage successive from low to high or from high to
low curved logarithmic.
3. Output signal voltage range and dimming curved setting inquire order as follow:
|
Command Number |
Command Code |
Command Name |
|
224 |
YAAA AAA1 1110 0000 |
Set output range 1-10V |
|
225 |
YAAA AAA1 1110 0001 |
Set output range 0-10V |
|
229 |
YAAA AAA1 1110 0101 |
Choose dimming curved |
|
238 |
YAAA AAA1 1110 1110 |
Inquire dimming curved |
|
241 |
YAAA AAA1 1111 0010 |
Inquire output state |
Note:
When setting the dimming curve, first set the value of DTR, and then set the value of DTR to the dimming curve. Only when 0 is used as the dimming curve value is logarithmic dimming, and other values are linear dimming. When the query dimming curve returns a value of 0, it indicates that the current state is logarithmic dimming, and 1 is linear dimming.
Typical Application
