| Select Pins: | 2 Pin (Base) |
|---|---|
| Select Quantity: | 10pcs (Base) |
| Availability | In Stock |
| Condition | Brand New |
Double wire push in connector can largely simplify your 5V to 48V wire connection project, suitable for electrical cables ranging from 20 AWG to 24 AWG. Whether it's solid wire, single-strand wire, or multi-strand wire, our quick splice wire connectors work perfectly for stable connection.
No stripping or soldering is required. Just push the wires into the connector's ports, then use pliers to apply pressure to the metal protuberances, which will puncture the insulating layer and firmly join the wires. The connection is super solid and won’t come loose even when pulled, but these micro wire to wire connectors are unable to release and reused in the future.
The 2 way push wire connector uses transparent PC as material, which is heat-resistant, reducing the risk of short circuits, safe to use. The transparent shell also allows you to better observe wire status during connection.
10 pieces are included in one pack. An additional 10 caps will be added for dust and water protection. But these 2 port push in wire connectors are still IP20 waterproof. Please use it in clean and dry environments.
If you need customization service or print your own logo on these connectors, please contact us.
1. 2 port wire to wire crimp connectors, for 20 to 24 AWG wire connection.
2. Solderless and stripless: A quick clamp is all it takes. The connection is super solid.
3. Small size, PC material, heat-resistant, safe to use.
4. Transparent shell for better observation, with additional caps for added protection.
5. 10 pieces included.
Suitable Strip Light: 2pin single color LED strip
Wire Gauge: 20-24AWG
Material: Flame Retardant PC
Hole Diameter: 1.8mm
Size:10mm(L)X6.4mm(W)X6mm(H) / 0.39”(L)X0.25”(W)X0.23”(H)
IP Rating: IP20 non-waterproof
Package: 10 pcs
1.Insert the 20-24AWG wires into the two holes on each side of the connector.
2.Use pliers to press down on the metal bump above the connector to pierce the wires' insulation jacket.
3.Cover the connector with transparent PC caps.
4.Confirm the wires are securely connected with each other by gently pulling on them.
Caution: Please operate the wire connection while the power is off. Please make sure the environment is dry. Only used for low voltage wiring project from 5V to 48V.
