| Select Pins: | 4 Pin (Base) |
|---|---|
| Select Quantity: | 10pcs (Base) |
| Availability | In Stock |
| Condition | Brand New |
These are 4-port push-in wire connectors, designed for situations requiring an extension or connection of electrical wires. These micro wire-to-wire connectors adapts 20AWG to 24AWG wires for 5V-48V low voltage projects.
There is no need to solder or strip the wires, and the connection process is very fast. All you need to do is insert the wires into the holes on both sides of the splice extend wire connectors and use pliers to press down on the protruding metal part. Make sure that the metal penetrates the outer jacket to complete the connection. The connection can be finished within a few minutes, and is very solid. You don't have to worry about the wires coming off.
Made from PC material, 4 way push wire connector is flame-retardant, minimizing the risk of short circuits and is very safe to use. The size of the 4 pin wire connector is compact in size, offering a subtle presence that is hard to notice. The shell is transparent, you can observe the status of the wire connection anytime. Each package includes ten connectors. We will also ship additional ten transparent dust caps for added protection.
1. No more stripping, soldering, or twisting wires for connections. The connection is quick and easy.
2. Super solid connection, won’t be loose even when pulled.
3. Suitable for 20 to 24 AWG electrical wire extend connection, including single stranded wires, multi-stranded wires and solid wires.
4. Used in low voltage project between 5V and 48V.
5. 10 pieces are included in one package, with 10 extra caps.
6. PC material, flame-retardant, safe to use.
7. IP20 non-waterproof, inadequate for wet environments.
Suitable Strip Light: RGB LED strip
Wire Gauge: 20-24AWG
Material: Flame Retardant PC
Hole Diameter: 1.8mm
Size:10mm(L)X12mm(W)X6mm(H) / 0.39”(L)X0.47”(W)X0.23”(H)
IP Rating: IP20 non-waterproof
Package: 10 pcs
1.Insert the 20-24AWG wires into the two holes on each side of the connector.
2.Use pliers to press down on the metal bump above the connector to pierce the wires' insulation jacket.
3.Cover the connector with transparent PC caps.
4.Confirm the wires are securely connected with each other by gently pulling on them.
Caution: Please operate the wire connection while the power is off. Please make sure the environment is dry. Only used for low voltage wiring project from 5V to 48V.
