| Select Connector: | Waterproof Wires, Quick Waterproof Connectors, 4-Pin Plug Connectors (Base), 4-Pin Wires (Base) |
|---|---|
| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Unlike standard 180-degree chip-on-board cob lighting design, the two sides of the luminous layer of this cob rgb strip are designed with a white edge, narrowing the luminous beam angle. With its innovative design and engineering optimization, this high-density, high-brightness cob led rgb strip focuses the light on the target area, especially suitable for directional lighting e.g. cabinet contouring, display lighting. Per meter 1080 chips on board led density (329 per foot) completely eliminates the graininess and achieves continuous linear light emission, which is a perfect alternative to neon-like light for home use; with more light-emitting led dots per unit area work together to effectively improves the light efficiency.
For the 1134 chips/m type (15W/m, 55.55mm/cut), we currently offer only a 5-meter sample. Subsequent purchases require a minimum order quantity of 500 meters.
• White edge design on both sides of the light-emitting layer, the light is concentrated
• 24V low voltage power supply, 5 meters long distance transmission with low loss
• 22 watts per meter of ultra-high power for high cob led brightness
• 4Pin connectors on both sides of the rgb cob led light strip, support multiple series connection and convenient wiring (not with matching connectors to wire to the RGB controller or driver)
• With sticky adhesive backing, super flexible PCB, 0.4mm PCB thickness, 3mm light strip height
If you select the kit, you'll get a WiFi wireless mi-light RGB controller E3-WR and a LRS-150-24 meanwell led power supply.
|
LED Strip Type:
|
Densest Focus Beam Cob Ultra Bright Rgb Led Strip |
| Input Voltage: | DC 24V |
| PCB Width: | 12mm (0.47") |
| PCB Thickness: | 0.4mm |
| PCB Height: | 3mm |
| Length: | 5m/16.4ft |
| LED Quantity: | 1080 Chips/m, 308/ft, 5400/roll |
| Color Mode: | RGB |
|
Power:
|
22W/m, 6.7W/ft, 110W/roll
|
| Lumen: | 1500-1800lm/m max |
| Cut Length: | 50mm/2" |
| Beam Angle: | 120° |
| Connector: | 4-pin terminal connector at both ends |
| Connector Length: | 140mm-150mm (5.5"-6") |
| Working Temperature: | -20℃~+45℃ |
|
Waterproof Rating:
|
Indoor IP20 & outdoor IP67 IP68
|
Led Cob Rgb Strip Wiring Diagram
