| Select Input Voltage: | DC12V (10mm per cut) (Base), DC24V (20mm per cut) (Base), DC24V (45mm per cut) |
|---|---|
| Select Kit: | LED Strips (Base), 5m/16.4ft Kit |
| Select Length: | 16.4ft (5 meters) (Base), 32.8ft (10 meters) |
| Select Light Color : | Warm White(2700K) + Daylight White(6500K) (Base) |
| Select Light Type: | Narrow-Beam COB (with white borders) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Based on the COB chips on board technology, Super Lighting LED has updated the COB strip by changing the COB's 180-degree light emission angle to 120-degree, which reduces sideways glare and focuses the light more on certain areas that require accent lighting, such as worktops, under cabinets, display cabinets, bookshelves, etc. The 8mm PCB width makes it easy to invisible installation, and the light performance is very homogeneous even without the use of aluminum led profile as light diffuser.
In addition, unlike the traditional 3-wire cob CCT control, this accent beam led lighting COB tape carries a 2-wire color temperature change, with no distinction between positive and negative poles, each wire represents a Kelvin color temperature. If you prefer to use a smart controller, you need to select a specific 2-wire CCT type to fade the light from 2700K warm white to 6500K white. Consider the LC2-RF and C3 wireless control combo in the kit with LRS-100 series AC to DC power supply (only for 5m length).
Since the LC2-RF controller can only handle 10A current, it cannot control a 10-meter length of 12V LED (10 meters consumes 144 watts; a 200-watt controller and power supply are recommended). However, it can control a 10-meter length of 24V LED. Therefore, we do not offer a 10-meter kit option. If needed, please purchase these components separately.
Standard 180 light versions are sold separately.
Product Specifications
| LED Strip Type: | 2 Wire CCT Changeable COB LED Tape |
| Beam Angle: | 120° |
| Input Voltage: | DC 12V, 24V |
| Power: | 14.4W/m, 72W 5m roll, 144W 10m roll |
| LED Color: | Tunable White, 2700-6500 Kelvin color temp |
| Strip Width: | 8mm/0.3" for IP20, 10mm/0.4" for IP67 and IP68 |
| LED Quantity: | 600 Chips/m |
| Length: | 5m/16.4ft, 10m/32.8ft |
| Cuttable: | 10mm/0.4", 20mm/0.8", 45mm/1.77" |
| Waterproof Rating: | Non-waterproof IP20, Waterproof IP67, Underwater IP68 |
| CRI: | 90+ (High) |
| Lumen: | 1200lm/m max |
| Connector: | 2-pin red and black wires at both ends |
| Control: | 2-wire CCT control |
CCT 2 Wire LED Light Wiring Diagram
