| Select Length: | 3.28ft (1 meter) (Base) |
|---|---|
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Transparent Heat Shrink Tube IP67 |
| Availability | In Stock |
| Condition | Brand New |
4mm wide super slim led strip light uses SMD4020 LEDs as the light source to emit light from the side, precisely controlling the direction of the beam through its directional illumination properties. The SK6812 (similar to the WS2812) control circuitry is integrated within the light emitting devices, and each 4020 RGB LED is a pixel, with the brightness and color of the 144 LEDs individually controlled via adafruit neopixel or other addressable controller.
This side firing led strip focuses on its extremely thin 4mm wide FPCB design, allowing the LED strip to be installed in tight or specially shaped spaces while the 144 lights are arranged in a density to provide a uniform dream color light effect. Requires 5 volts of low voltage power.
How do I connect this LED strip to the controller and power supply?
The slim side led strip features male JST quick connector on one end and female JST quick connector on the other. A connecting cable is included. Use the arrow markings on the strip board to identify which end should connect to the controller. The connection cable has three wires:
- Red wire (positive) connects to the controller's VCC pin.
- Green wire (data signal) connects to the controller's DAT pin.
- White wire (negative) connects to the controller's GND pin.
The controller must be connected to the power supply with correct polarity (positive to positive, negative to negative).
Product Specification
| LED Strip Type: | Super Slim Addressable RGB Side Fire LED Strip |
| LED Chip: | SMD4020 + SK6812 (WS2812) |
| Input Voltage: | 5V |
| LED Color: | RGB |
| LED Quantity: | 144 |
| IC Pixel: | 144, individually addressable |
| Length: | 1m 3.28ft roll |
| Cut: | 1 LED, 6.94mm/0.27" |
| FPCB Wdith: | 4mm |
| Connector: | 3-pin JST female + male |
| Connector Length: | 10-15cm (4-6") |
| Working Power: | 14.4W/m, 0.1W/LED, 4.4W/ft |
| Grey Scale: | 256 |
| Waterproof Rating: | Non-waterproof IP20 (Bare strip), IP67 waterproof (Sealed in silicon tube) |
| Beam Pattern: | 120 degrees |