| Note: | Free Customization (>500m), Each Order Only Requires One Customization Fee (Base) |
|---|---|
| Select Connector Type: | JST Fast Connectors (Base), 5-pin XLR Connectors |
| Select LED Quantity: | 120LEDs/m (Base) |
| Select Length: | 16.4ft (5 meters) (Base), 65.6ft (20 meters), 32.8ft (10 meters), 49.2ft (15 meters) |
| Select PCB Width: | 10mm (0.39in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
48V RGBIC led tape systems eliminate voltage drop over long runs, enabling seamless commercial-scale dynamic lighting with 65+ feet continuous installations.
This 48-volt DMX addressable RGB product is available in lengths of up to 20 meters (65.6 feet), so you don't need to inject additional electrical power over a 20-meter run. By placing an adequate 48 volt DC power supply on one side of the tape strip, the light has excellent consistency over the 20m long length with no noticeable voltage drop.
The 48V 2835RGB DMX Model strip light delivers uniform ambient lighting for indoor and outdoor LED applications. The use of SMD2835 LEDs allows it to carry a high density of 120 lights per meter with a low power consumption of only 11 watts per meter (3.35 watts per foot). This is a very efficient and cost effective choice for DMX programmable lighting where light needs to be extended over long distances.
Our DMX light strips are different from other DMX-controllable tapes. You can plug these DMX512-enabled led strips directly into your DMX lighting system without the need for any DMX decoder to convert signals. JST connectors and XLR connectors are provided for easy DMX connection.
| Click Here For DMX Controller |
How to control DMX RGB strips with smart DMX controller?
Our WiFi dmx controller WT-DMX-M Model can directly connect to dmx RGB or RGBW or RGBCCT led tape strips, and switch the color modes via mobile Tuya APP and wireless remote control.
It should be noted that when the voltage supported by the dmx512 controller is not the same as the voltage of the dmx strip, you need to configure a power supply for them separately. That is, use DC12-36V power supply to drive the controller and use DC48V power supply to drive the light strip, and there can't be a positive connection between the controller and the light strip!
Professional DMX control system can be equipped with professional computer programmed DMX controller.
Product Specifications
| Item Type: | 48 Volts DMX-Driven Pixel Mappable LED Tape |
| LED Chip: |
SMD2835
|
| Input Voltage: | DC48V |
|
Power:
|
11w/m, 55w 5m-roll, 110w 10m-roll, 165w 15m-roll, 220w 20m-roll
|
| LED Color: | Addressable RGB (DMX512 directly compatible) |
| PCB Width: | 10mm |
| LED Quantity: | 120 LEDs/m |
| IC Type: | SOP10 GS8516C |
| IC Quantity: |
10 ICs/m ( 1 IC controls 12 LEDs), 50 for 5m, 150 addresses; 100 for 10m, 300 addresses; 150 for 15m, 450 addresses; 200 for 20m, 600 addresses. |
|
Cut Unit:
|
100mm/3.94'', 12 LEDs can be cut
|
| Waterproof Rating: | Non-waterproof IP20, Indoor Waterproof IP65, Outdoor Waterproof IP67 IP68 |
| Length: | 5m/16.4ft, 10m/32.8ft, 15m/49.2ft, 20m/65.6ft |
| Working Temperature: | -20℃ ~ +45℃ |
| Lifespan: | 50,000+ hours |
| Beam Angle: | 120° |
| Lumen: | 7-8 lm/LED |
