Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 6990

Remote Battery Operated 5050 Black RGB Led Tape Lights With Switch Battery Pack

MODEL: BATT-LED-RGB-5050D30W10
Price based on selections below:
$6.98
Select Length:3.28ft (1 meter), 16.4ft (5 meters), 6.56ft (2 meters), 9.84ft (3 meters), 13.12ft (4 meters), 0.5m (20inch/1.6ft) (Base)
Select Waterproof Rating:Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The Battery Powered RGB Light Strip controlled by a handheld remote control is a flexible and portable lighting device. The black RGB led strip is powered by 3 AA batteries (not include), which are placed in a specialized battery compartment, allowing the RGB strip to be free of electrical outlets for true portability.

This color-changing type of battery-powered led strip uses RGB technology, with 5050 SMDs consisting of red, green and blue colors as the light source, 30 LED beads per meter in this tape. By adjusting the brightness and mixing method of these three colors, it can present a wide variety of color effects. Users can easily control the battery RGB led strip's color (yellow, cyan, pink, violet, indigo, etc.), brightness, and light mode (flash, strobe, fade, smooth) through the remote control.

 

• Designed with 10mm width, the battery operated RGB led strip is equipped with adhesive backing, easily pasted on various flat surfaces.

• Adopts black PCB board, it can effectively reduce the reflection and interference of light, and enhance the lighting effect.

• Waterproof versions of IP20 and IP65 are available. IP20 version is suitable for indoor dry environments; IP65 version can withstand dust and jet water jets, and is suitable for outdoor use, such as gardens, courtyards, terraces, etc.

• Available in 0.5m, 1m, 2m, 3m, 4m and 5m lengths, the strip tape can be cut and spliced freely according to your needs (4-pin terminal connector required).

 

Product Specification

LED Strip Type: 
Battery Powered RGB Led Light Strip with Remote
PCB Width:  10mm
Input Voltage:  3*AA Batteries (not include)
Length:  0.5M/1.64ft, 1M/3.28ft, 2M/6.56ft, 3M/9.84ft, 4M/13ft, 5M/16.4ft
CRI: 80
LED Color:  Color Changing RGB
LED Quantity:  30 LEDs/m
LED Chip:  SMD5050
Cut Length:  33.33mm (1.3in)
Beam Angle:  120°
Waterproof Rating:  IP20 Non-waterproof, IP65 surface glued

 

Battery Operated RGB Led Tape Lights Remote Control

© 2026 SuperLightingLED. All specifications are subject to change without notice.