| Select Installation: | No (Base), Adhesive Backing + Brackets, Adhesive Backing (Base), Mounting Brackets |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base), 65.6ft (20 meters), 32.8ft (10 meters), 49.2ft (15 meters) |
| Select Light Color : | RGB + Warm White 3000K (Base), RGB+ Natural white 4000K (Base), RGB+ Daylight White 6500K (Base) |
| Select PCB Width: | 15mm (0.59in) (Base) |
| Select Waterproof Rating: | IP67 Waterproof Outdoor Use, IP68 Underwater Use, IP20 Bare PCB (Base) |
| Availability | In Stock |
| Condition | Brand New |
Introducing the ultimate solution for large-scale, dynamic lighting projects: the 48V UCS7624/UCS7614 Addressable RGBW LED Strip. Engineered specifically to overcome voltage drop, this strip allows for continuous runs of up to 20 meters from a single power connection, drastically simplifying wiring and reducing installation costs. The high-voltage 48V DC input is the core of the strip's long-run capability, allowing current to be transmitted more efficiently over copper traces, maintaining consistent voltage and brightness.
Featuring a high-density, dual-row design with 168 LEDs per meter and dual-signal redundancy, the UCS7624/UCS7614 IC incorporates a backup data line (BI) alongside the primary data line (DI). This redundancy ensures that the failure of any single IC does not affect data transmission to subsequent ICs, dramatically improving the robustness of the entire lighting system.
Our bright addressable RGBW led strip delivers brilliant, reliable performance for professional architectural facades, expansive commercial spaces, and ambitious creative installations where length and reliability are paramount. With 12 individually controllable ICs per meter, you can achieve smooth animations and high-resolution lighting effects, even over vast distances.
To control this 48V addressable RGBW LED strip, you need a pixel controller that is fully compatible with the UCS7624/UCS7614 or UCS2904 RGBW IC protocol. Some standard controllers, such as the SP107E and SP530E, are not compatible with this UCS7624/UCS7614 IC, so please make sure your controller IC library includes this IC model.
If your pixel controller does not support a 48V direct power input, here is how to step-by-step:
1. Powering the Controller: Use a separate, low-voltage small power adapter (such as DC 12V 1A or DC 24V 1A) that matches your controller's input specs to power it on independently.
2. Connecting Signals: Connect only the Data (DAT) output wire and the Negative/Ground (GND/-) wire from the controller to the corresponding ports on the digital 48V LED strip.
3. Powering the LED Strip: Connect the 48V addressable LED strip directly to a dedicated 48V power supply that has sufficient wattage to cover the total length of your strip.
| Parameter | Details |
|---|---|
| Product Model | 48V-UCS7624-RGBW-168W15 |
| Input Voltage | DC 48V |
| Power Consumption | 17.4 Watts per meter |
| IC Type |
UCS7624/UCS7614 (Dual Signal, Breakpoint Resume)  |
| IC Quantity | 12 ICs per meter |
| LED Type | SMD 5050 RGBW (4-in-1) |
| LED Density | 168 LEDs per meter |
| Pixel Configuration | 14 LEDs per pixel (per IC) |
| Color | RGB + White |
| PCB Width | 15mm |
| Max Run Length | 20 meters (65.6 feet) with single-end power feed |
| Cutting Unit | Every 14 LEDs (approx. 83.33mm / 3.28 inches) |
| IP Rating | IP20, IP67, IP68 |
| Operating Temperature | -20°C to +50°C |
| Length | Power | Driver |
|---|---|---|
| 5m (16.4ft) | 87W | 48V 100W-150W Power Supply (e.g., MeanWell LRS-100-48 or LRS-150-48) |
| 10m (32.8ft) | 174W | 48V 200W-250W Power Supply (e.g., MeanWell LRS-200-48 or UHP-200-48) |
| 15m (49.2ft) | 261W | 48V 300W-350W Power Supply (e.g., MeanWell RSP-320-48 or LRS-350-48 or UHP-350-48) |
| 20m (65.6ft) | 348W | 48V 450W Power Supply (e.g., MeanWell LRS-450-48) |