Choosing 48 volt to run LED strip lights is great for large home and commercial projects. 48V, while higher than the common 12V or 24V, still meets safe voltage requirements.
Due to good current planning, 48V led strip can run up to 60 meters. Typically, low voltage LED strips cause brightness degradation and color change due to voltage drop over long running distances. 48V LED lights can solve these problems very well.
Need a 48V controller to match your lights?
Look at Mi-light or Skydance LED system for wireless remote control and APP control.
Look at E1-L (1CH, Max 384W) for sensing control.
Look at DA4-L (5A/CH, 4CH) for DALI dimming and V1-S (1CH, Max 720W) for Triac dimming; BinColor BC-320-6A set for RF and in wall dimming.
Look at D5-E (4A/CH, 5CH), D5-P (4A/CH, 5CH), Ltech 4CH 8A/CH M4-C/D4A or M4-E/D4B for DMX control.
And 3CH LT-3070-8A, 3CH EV3-H, 3CH V3-L, 5CH EV5-L 48V LED strip light ampifiers are available.
Need a 48V power supply to light up your lights?
Look at our Meanwell switching power supply series here.
(0)
