Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-19 | ID: 7318

IP68-Rated Solid Silicone Waterproof DMX512 5050 RGB LED Ribbon Light Strip

MODEL: DMXRGB-IP68-24V5050X60
Price based on selections below:
$55.98
Select Connector:5-pin JST Connectors (Base), 5-pin 15CM Waterproof Wires, 5-pin Waterproof Fast Connectors
Select Input Voltage:DC24V (Base)
Select LED Quantity:60 LEDs/m (Base)
Select Length:32.8ft (10 meters), 16.4ft (5 meters) (Base)
Select Waterproof Rating:Underwater IP68 - Adhesive Back (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

This 24V addressable DMX RGB LED strip light delivers dynamic color changing using native DMX512 protocol, eliminating the need for intermediary decoders. Built with 60 SMD5050 RGB LEDs per meter inside an extrusion of solid silicone, this IP68 submersible LED strip light provides ingress protection for underwater fountains, pool perimeters, and harsh outdoor architectural facades. Each 100mm section contains 6 LEDs governed by an integrated DMX IC, consuming 3 DMX channels per addressable segment (10 pixels per meter). Discover our broader range of RGB DMX LED tape and integrate this model with our DMX control systems and an outdoor-rated 24V waterproof power supply for synchronized lighting displays.

Key Features

Solid Silicone IP68 Ingress Protection

Full solid silicone encapsulation protects against continuous submersion in water, chlorine exposure, and outdoor UV degradation.

Direct DMX512 Protocol Support

Communicates directly with standard DMX consoles and controllers without requiring separate external DMX signal decoders.

Segmented Pixel Control

Configured with 10 addressable pixel segments per meter, where each 100mm cut section operates across 3 discrete DMX channels (R, G, B).

24V DC Operating Voltage

Operates on 24V direct current to reduce electrical line resistance and minimize voltage drop over 5m and 10m continuous runs.

Multiple Connector Options

Supplied standard with a 5-pin JST-SM connector, with factory options for 5-core bare wire pigtails or threaded waterproof connectors.

Technical Highlights

  • Solid silicone encapsulation forms a solid barrier without hollow air cavities, preventing internal condensation during thermal cycling.
  • Equipped with self-adhesive backing along the 14mm base for immediate positioning prior to mechanical clip mounting in underwater environments.
  • Compatible with programmable stage consoles, architectural DMX master controllers, and Madrix software setups.
  • Provides 10 individual DMX control zones per meter (30 DMX addresses per meter) for smooth color chasers, sweeps, and video mapping.

Product Specifications

ParameterDetails
Product SKUDMXRGB-IP68-24V5050X60
Working VoltageDC 24V
Power Consumption14.4W per meter
LED TypeSMD5050 Tri-color RGB
LED Density60 LEDs per meter
Control ProtocolStandard DMX512 (differential signal)
Pixel Pitch / Resolution10 pixels per meter (1 IC per 6 LEDs)
DMX Channel Footprint3 channels per pixel (30 channels per meter)
Cut Interval100mm (3.94 inches) along designated solder pads
Ingress Protection RatingIP68 (submersible in fresh and chlorinated water)
Encapsulation MaterialOptical-grade solid silicone (UV-resistant)
Physical Dimensions14mm wide x 5mm high (0.55 in x 0.20 in)
Reel Lengths Available5 meters (16.4 ft) / 10 meters (32.8 ft)
Mounting MethodIntegrated adhesive backing
Default Termination5-pin JST-SM connector (waterproof connector/wire optional)

Application Scenarios

Submerged Fountain and Pool Illuminations Install this solid silicone LED strip light in underwater applications such as splash pads, fountains, and swimming pool perimeters using our submersible pool LED strips hardware guidelines. The solid silicone jacket prevents water ingress even under hydrostatic pressure.
Architectural Facades and Bridges Ideal for exterior perimeter accenting where outdoor addressable DMX LED strip lights must withstand rain, snow, and UV radiation. The 24V DC input allows longer continuous circuit lines along building cornices without noticeable brightness degradation.
Theme Parks and Stage Productions Integrate directly into standard lighting consoles for live entertainment venues. Because this LED strip light speaks native DMX512 protocol, technicians can map color effects directly across stage steps, trussing, and scenic elements without external protocol conversion boards.

How to Install & Use This LED Strip

  1. Inspect the LED strip light and test color switching with your DMX512 controller and 24V DC power supply prior to field mounting.
  2. Cut only along the marked 100mm copper line intervals if sizing is required, and reseal all exposed cuts with neutral-cure silicone and end caps to retain the IP68 rating.
  3. Connect the 5-pin wiring: 24V DC (+), Ground (-), DMX Data+ (A), DMX Data- (B), and Signal Ground/Addressing line to your DMX driver terminal.
  4. Set starting DMX addresses via your hardware programmer or software patch list to assign channel universes correctly.

⚠ Precautions

  • Do not exceed a continuous 10-meter single-ended power feed.
  • Calculate total power demand and provide at least 20 percent spare driver wattage capacity (load should not exceed 80 percent of power supply rating).

Power Consumption Reference

Calculations are based on 14.4W per meter with full RGB output active. A minimum 20% driver headroom safety margin is included in all recommendations.
LengthPowerRecommended Driver
1m (3.3 ft)14.4W24V 20W DC power supply
5m (16.4 ft)72.0W24V 100W DC power supply
10m (32.8 ft)144.0W24V 180W or 200W DC power supply (dual-end injection)

What's in the Box

  • ✓1 x Reel 24V DMX512 RGB LED strip light IP68 waterproof (5m or 10m based on selection)
  • ✓1 x Factory-attached 5-pin input connector/wire
  • ✓1 x Factory-attached 5-pin output connector/wire
© 2026 SuperLightingLED. All specifications are subject to change without notice.