Spec Sheet - WS2815-3535RGB-96W8

Select Input Voltage:	DC12V (Base)
Select LED Quantity:	96LEDs/m (Base)
Select Length:	16.4ft (5 meters) (Base)
Select Waterproof Rating:	Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - Adhesive Back
Availability	In Stock
Condition	Brand New

The WS2815 12V individually addressable 3535 RGB LED strip delivers 96 pixels per meter on an ultra-narrow 8mm flexible printed circuit board. Engineered with integrated WS2815 driver ICs and dual-signal data routing, this LED strip provides unbroken continuous transmission so that a single failed LED does not interrupt the remaining run.

Running on a constant 12V DC input, the 5m reel maintains consistent color saturation and luminance from end to end without visible voltage drop across any solid color. The compact SMD 3535 footprint makes it suitable for concealed linear lighting, slim extrusion channels, architectural reveals, and interactive digital signage projects requiring precise pixel mapping.

Key Features

Individual Pixel Control

Each SMD 3535 RGB LED contains an integrated WS2815 IC, allowing independent 24-bit color addressing for every single node along the LED strip.

Dual Data Breakpoint Resume

Dual-line data transmission ensures that if any single pixel encounters damage, subsequent pixels continue to receive signals normally without system blackout.

Native 12V DC Power Architecture

Operates directly on 12V DC power without inter-pixel dropping resistors, eliminating visible voltage drop over a complete 5m reel run on any display color.

Slim 8mm Flexible Circuit

The narrow 8mm PCB fits into slim aluminum channels and pairs directly with an 8mm silicone neon diffuser for spotless linear diffusion in confined spaces.

Single-LED Cut Capability

Every single LED can be cut individually at designated cut lines every 10.4mm, providing exact dimension matching for custom architectural fixtures.

Factory JST-SM Connectors

Pre-soldered 4-pin JST-SM connectors on both input and output ends allow rapid connection to digital controllers and secondary power injection leads.

Technical Highlights

96 individually addressable pixels per meter deliver tight 10.4mm pitch spacing to minimize pixelation in direct-view and diffused accent installations.
Integrated dual-signal routing includes Data (DI/DO) and Backup Data (BI/BO) lines for fault-tolerant pixel array installations.
Standard RGB color line sequence integrates smoothly with standard SPI pixel controllers, Madrix software, and digital light consoles.

Product Specifications

Parameter	Details
Product Model	WS2815-3535RGB-96W8
Input Voltage	12V DC
LED Density	96 LEDs/meter (480 LEDs per 5m reel)
Pixel Density	96 individually addressable pixels/meter
LED Package	SMD 3535 RGB
Driver IC	WS2815 (embedded inside LED package)
Signal Transmission	Dual data lines (Data + Backup Data with breakpoint resume)
Power Consumption	10W/meter (50W per 5m reel at full white)
Current Draw	0.83A/meter (4.17A per 5m reel at 12V DC)
PCB Width	8mm (0.31 in)
Reel Length	5 meters (16.4 feet)
Cut Interval	Every 1 LED (10.4mm / 0.41 in)
Color Sequence	RGB (standard SPI configuration)
Grayscale Levels	256 levels per channel (16.7 million colors)
Ingress Protection	IP20 non-waterproof / IP67 silicone tube waterproof
Connector Type	4-pin JST-SM connectors (12V, DI/DO, BI/BO, GND) on both ends
Beam Angle	120 degrees

Application Scenarios

Concealed Architectural Cove and Reveal LightingThe 8mm slim width allows this LED strip to fit into minimal millwork reveals, recessed baseboards, and shallow ceiling coves. High 96 LED/m density produces even, continuous color sweeps without harsh hot spots along wall washes.

Commercial DMX Stage and Entertainment SetsIntegrate the LED strip with a DMX512 to SPI decoder to drive real-time pixel-mapped stage backdrops, club perimeter lighting, and music festival trusses using industry-standard Art-Net or sACN network infrastructure.

Smart Home and Voice-Controlled AmbiencePair this addressable ribbon with a WiFi smart pixel LED controller to orchestrate custom dynamic scenes, sound-activated sequences, and schedule automation via home automation platforms.

How to Install & Use This LED Strip

Select an appropriate constant-voltage regulated 12V DC power supply delivering at least 60W per 5m reel to maintain a 20% operating safety headroom.
Check signal direction indicated by directional arrows on the flexible circuit; ensure data flows away from your controller output toward DO.
Connect the 4-pin JST-SM female connector to your SPI controller, verifying that 12V DC positive, Data (DI), Backup Data (BI), and Ground (GND) correspond correctly.
Conduct a temporary power-on test across full red, green, blue, and white sequences before peeling the adhesive backing.
Peel the backing tape progressively, pressing the LED strip firmly onto the mounting substrate using steady finger pressure for 30 seconds per section.

Dual-Signal 2814IC Pixel LED Strip Wiring Diagram

What's in the Box

✓1 × 5-meter (16.4ft) WS2815 12V 3535 RGB LED Strip (96 LEDs/m) on plastic reel
✓1 × Pre-attached 4-pin JST-SM female connector with separate power injection wire tails
✓1 × Pre-attached 4-pin JST-SM male connector

Frequently Asked Questions

Q: What is the advantage of WS2815 over 5V WS2812B strips?

A: The WS2815 operates natively on 12V DC, eliminating visible end-to-end voltage drop across a full 5m reel, while its dual-data line prevents a single damaged pixel from halting downstream signals.

Q: What power supply is required for a 5-meter run?

A: A 5-meter reel consumes 50W at full brightness, so a 12V DC power supply rated at 60W or higher is recommended to maintain the standard 20% power headroom.

8mm Slim WS2815 Individual Addressable 3535 RGB 480 Pixels LED Strip Reel