| Select Connector: | 5-pin JST Connectors (Base), 5-pin 15CM Waterproof Wires, 5-pin Waterproof Fast Connectors |
|---|---|
| Select IC Pixels: | 12 Pixels/Meter (72 LEDs/Meter) (Base) |
| Select Length: | 32.8ft (10 meters) (Base) |
| Select Light Color : | DMX512 RGB+White 3000K (Need DMX Console and Self-Programming) (Base), DMX512 RGB+White 6000K (Need DMX Console and Self-Programming) (Base), DMX512 RGB+White 4000K (Need DMX Console and Self-Programming) (Base) |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
This 24VDC DMX addressable RGBW LED strip uses the TM512BC integrated circuit to decode native DMX512 differential signals directly without requiring an intermediary SPI decoder. Built on a 12mm white flexible PCB with 72 SMD5050 4-in-1 LEDs per meter, each TM512BC IC independently drives a segment of 6 LEDs across 4 distinct color channels (Red, Green, Blue, and White).
Operating at 15W per meter on a 24V DC circuit, this 10-meter continuous reel delivers smooth DMX chasing RGBW animation sequences while reducing current draw and voltage drop over long linear installations. Explore our full line of rgbw dmx led strip solutions for more types.
Onboard TM512BC driver chips connect directly to standard DMX512 consoles and controllers without external SPI signal translators.
72 SMD5050 RGBW quad-die LEDs per meter mounted on a 12mm white PCB deliver uniform color mixing and 15W per meter power distribution.
24V operation allows full 10-meter single-feed runs with minimal voltage drop compared to 5V or 12V addressable tapes.
Cuttable every 83.33mm (6 LEDs per segment) to match custom architectural lengths and achieve 12 individual controllable pixels per meter.
Equipped with 5-pin JST-SM connectors for power and DMX data lines, with optional IP67 waterproof screw-lock connectors available.
| Parameter | Details |
|---|---|
| Product Model (SKU) | DMXRGBW-TM512-5050X72 |
| Operating Voltage | 24V DC |
| Power Consumption | 15W per meter (150W per 10m reel) |
| LED Density | 72 LEDs per meter (720 LEDs per 10m reel) |
| LED Chip Type | SMD5050 4-in-1 RGBW |
| Driver IC | TM512BC (Standard DMX512 protocol) |
| Pixel Resolution | 12 pixels per meter (6 LEDs per pixel) |
| DMX Channels | 48 DMX channels per meter (4 channels per pixel) |
| Reel Length | 10 meters (32.8 feet) |
| PCB Width | 12mm (0.47 inches) |
| PCB Color | White |
| Cut Interval | 83.33mm (3.28 inches, 6 LEDs) |
| Beam Angle | 120 degrees |
| Ingress Protection | IP20 (Indoor dry) or IP67 (Silicone tube) |
| Standard Connector | 5-pin JST-SM (PI, A/D+, B/D-, GND, 24V+) |
| Optional Connector | 5-pin waterproof connector / wire |
⚠ Precautions
Q: how to program TM512BC addressable DMX RGBW led strip？
A: Set the starting DMX address using a handheld TM512 programmer, patch 4 DMX channels per pixel in your lighting software (such as Madrix or QLC+), and build chasing or color-fade cues mapped to the strip's 12 pixels per meter.
Q: how to control DMX512 addressable led strip？
A: You can control this TM512BC LED strip using any standard DMX512 lighting desk, Art-Net/sACN Ethernet node, or standalone programmable DMX SD-card controller outputting standard RS485 differential signals.
Q: Can this TM512BC LED strip be cut to length?
A: Yes, this LED strip can be cut every 83.33mm (every 6 LEDs) at the clearly marked cut lines on the 12mm PCB.