| Select Channel Color: | White (Base) |
|---|---|
| Select Diffuser: | PC opal diffuser (Base) |
| Select Length: | 3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample |
| Availability | In Stock |
| Condition | Brand New |
The ALU-CM-KE-105 understated ceiling light crown molding aluminum LED channel delivers architectural indirect ceiling illumination by embedding directly into drywall. Designed for plaster-in mudding, the extrusion mounts along the wall perimeter with an 86mm vertical surface contact and projects outward by an understated 23mm.
This upward-angled geometry guides light directly onto the ceiling plane while concealing diodes from sightlines below. Built with an extra-wide 21mm (0.83") inner tray, this channel accommodates high-output COB LED strip models or double-row LED tape up to 21mm wide. Extruded from 6063-T5 aluminum alloy with a factory-applied white finish, the structure serves as a continuous thermal heat sink for LED strip continuous runs.
Perforated mud-in flange bonds flush with joint compound and paint to create trimless crown molding with led lights.
A 21mm (0.83") internal mounting floor accommodates wide multi-row tapes and ultra-bright flexible COB LED strip lights without edge crowding.
Extends only 23mm from the vertical wall surface to maintain minimal architectural lines while directing lumens upward across the ceiling.
Substantial 86mm vertical 6063-T5 aluminum body draws heat away from high-power LED strip modules to prevent thermal lumen decay.
Saturated PC opal diffuser spreads beam distribution to eliminate visible diode spots on nearby ceiling textures.
Available in 1m (3.28ft), 2m (6.56ft), 2.44m (8ft), and 20cm (7.87in) sample lengths to suit perimeter layouts.
| Parameter | Details |
|---|---|
| Model | ALU-CM-KE-105 |
| Product Type | Ceiling Light Crown Molding LED Profile |
| Channel Series | Crown Molding Lighting Channels |
| Extrusion Material | 6063-T5 Aluminum Alloy |
| Surface Finish | White |
| Inner Width | 21mm (0.83") |
| Outer Wall Height | 86mm (3.39") |
| Projection Depth | 23mm (0.91") |
| Overall Dimensions | W21mm x H86mm |
| Diffuser Material | Polycarbonate (PC) |
| Diffuser Type | Opal Diffuser |
| Compatible Strip Width | Up to 21mm (supports 10mm, 12mm, 15mm, and 20mm LED strip lights) |
| Mounting Type | Recessed Mud-In / Plaster-In Wall Mount |
| Available Lengths | 0.2m (sample), 1m (3.28ft), 2m (6.56ft), 2.44m (8ft) |
Q: how to install led channel on a drywall wall?
A:Fasten the 86mm perforated mounting flange directly to drywall studs with countersunk screws, apply joint tape and mud over the perforated wing, sand flush, and paint up to the profile edge.
Q: Can I install this crown molding with popcorn ceiling surfaces?
A:Yes. This understated profile mounts strictly to the wall surface with an upward 23mm projection, casting soft indirect light across the ceiling without requiring alterations to existing popcorn texture.
Q: What is the maximum LED strip width that fits this channel?
A:The inner tray measures 21mm (0.83") wide, fitting any standard 8mm, 10mm, 12mm, 15mm, or 20mm wide single-color, tunable white, or RGBW LED strip.
Q: Are end caps included with the 21mm inner width profile?
A:End caps are not included or required for the 21mm plaster-in variant, as the channel terminates flush against adjacent walls or is plastered cleanly into perimeter drywall returns.