| Select Connector: | 4-Pin Plug Connectors (Base), 4-Pin Wires (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Type: | DC12V - 810LEDs/m - 10mm (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
This DC12V cob led light strip delivers continuous, completely dot-free multi-color illumination across a full 16.4ft (5-meter) spool. Featuring 810 dense chips per meter embedded directly on a 10mm wide PCB with an ultra-low 3.15mm profile, this cob rgb led strip eliminates the visible diode spots common to standard SMD RGB light strips. Operating at 15W per meter (75W total per roll), the circuit architecture maintains consistent color fidelity and stable brightness across the entire 5-meter run from a single-ended power feed without visible voltage loss. Available in three ingress protection choices—non-waterproof IP20, outdoor silicone tube IP67, and submersible IP68—this versatile RGB color changing cob led strip integrates seamlessly into residential joinery, architectural coves, and commercial displays.
Dense chip-on-board packaging produces a continuous 180-degree beam angle with zero diode spotting on reflective countertops or diffusers.
Engineered 10mm copper PCB allows a complete 5-meter run powered from one end while maintaining uniform mixed RGB hues throughout.
Clearly indicated cut marks every 33.33mm allow exact sizing adjustments for tight millwork and display enclosures.
Each 16.4ft reel includes factory-soldered 4-pin female/male pin headers or power wires on both ends to speed up field installation.
Select from indoor IP20 bare board, outdoor IP67 silicone jacketed, or fully submersible IP68 solid encapsulation.
Pairs directly with an external Color Change RGB Controller Series to dial in static tones, dynamic fades, or music sync modes.
| Parameter | Details |
|---|---|
| Model Number | FSLCOB-12VRGB-810W10 |
| Operating Voltage | DC 12V |
| Power Consumption | 15W/m (75W per 5m roll) |
| LED Density | 810 LEDs/m (4,050 LEDs per 5m roll) |
| Emitting Color | RGB (Full Color Changing) |
| Terminations | 4-pin connectors or power wires on both ends |
| Beam Angle | 180° |
| PCB Width | 10mm |
| Strip Height | 3.15mm |
| Cut Interval | 33.33mm (1.31 in) |
| Standard Roll Length | 16.4ft (5 meters) |
| Available Waterproof Ratings | IP20 (Indoor), IP67 (Silicone Tube), IP68 (Underwater Submersible) |
| Adhesive Type | Thermal conductive self-adhesive back |
| Working Temperature | -20℃ to +45℃ |
⚠ Precautions
Q: can you cut rgb led strip lights
A:Yes. This 12V COB RGB LED strip can be cut cleanly every 33.33mm along the clearly printed copper solder line markings.
Q: how to connect cob led strip
A:Connect this strip using its pre-soldered 4-pin male pin headers, solder lead wires directly to the 10mm copper solder pads, or snap on a compatible 4-pin solderless COB connector.
Q: how to control rgb led strip
A:Connect the 4-pin output (+12V, R, G, B) to any standard 12V constant-voltage RGB controller, which lets you adjust color, saturation, dimming, and dynamic chase scenes via RF remote, wall panel, or smartphone app.
Q: Does a 5-meter run suffer from visible voltage drop?
A:No. The 10mm copper PCB is specifically designed so that a single-ended 12V power feed delivers consistent brightness and identical mixed RGB color tones across the full 5-meter reel.
Q: What power supply size should be used for one 16.4ft reel?
A:The 16.4ft reel consumes 75W at full output. To ensure long component life following the standard 80% load rule, choose a 12V DC power supply rated at 96W or higher.