Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-18 | ID: 7366

R3M 3-Channel Wireless Remote LED Strip Light Receiver For T Series

MODEL: BC-R3M
Price based on selections below:
$17.98
Select Input Voltage:DC12V-24V (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The BinColor BC-R3M 3-channel led wireless receiver operates between DC12V and DC24V constant voltage to regulate low-voltage LED strip lights across residential and commercial zones. Engineered with an RF wireless reception span of 40m to 50m, this compact unit mounts inside aluminum extrusions or ceiling coves to control up to three single-color channels, one dual-channel tunable white circuit, or one multi-color RGB circuit. Rated at 3A per output channel (9A total load), it manages 108W at 12V or 216W at 24V with 4096-level PWM grayscale resolution to eliminate visible stepping during low-end dimming.

Key Features

3-in-1 Load Configuration

Configures as 3 independent single-color channels, 1 tunable white CCT channel, or 1 RGB channel without modifying internal hardware.

4096 Grayscale Resolution

Employs 12-bit PWM output across 4096 steps to ensure flicker-free, continuous transitions from 0.1% to 100% brightness.

40M to 50M Reception

Receives wireless RF commands reliably at distances up to 50 meters in open spaces and through standard drywalls.

9A Total Current Capacity

Supports 3A per channel continuously, providing 108W total capacity at DC12V and 216W total capacity at DC24V.

Ultra-Slim 20mm Profile

Enclosed in a durable 135 x 30 x 20 mm housing that fits directly into narrow architectural channels and compact junction boxes.

Industrial Temperature Range

Operates continuously within severe ambient conditions ranging from -30 degrees Celsius up to 55 degrees Celsius.

Technical Highlights

  • Pairs only with BinColor T-Series handheld wireless remotes to adjust dimming, color temperature, and static RGB hues without running control wiring through walls.
  • Drives up to three runs of monochrome white COB LED strip simultaneously, giving you independent level setting across accent zones.
  • Enables dual-channel mixing for a tunable white COB LED strip, providing kelvin-range adjustments from warm 2700K to cool 6500K.
  • Executes smooth color transitions and static color selection when wired directly to a standard RGB COB LED strip.
  • Requires connection to a constant-voltage LED power supply rated between DC12V and DC24V to match the voltage requirement of your LED strip.
  • Features 4096-level dimming curves that suppress camera flicker and smooth out low-end dimming artifacts, making it suitable for broadcast studios and hospitality venues.
  • Includes internal memory retention to automatically restore previous brightness levels, color states, and dynamic settings following a mains power cut.

Product Specifications

ParameterDetails
Model NumberBC-R3M
Product CategoryLED Wireless Receiver
Input VoltageDC 12V - DC 24V
Output TypeConstant Voltage (PWM)
Number of Channels3 Channels
Max Output Current3A per channel (9A total)
Max Output Power (12V)108W (36W per channel)
Max Output Power (24V)216W (72W per channel)
Grayscale Levels4096 levels (12-bit)
Wireless FrequencyRF Wireless
Receiving Distance40m - 50m (line of sight)
Supported LED Configurations3x Single Color / 1x Tunable White (CCT) / 1x RGB
Terminal TypeScrew terminals (Input/Output)
Power-off Memory FunctionYes (restores last operational state)
Working Temperature-30°C to +55°C
Enclosure MaterialFlame-retardant ABS housing
Dimensions135 mm (L) x 30 mm (W) x 20 mm (H)
Product Weight48g
Ingress Protection RatingIP20 (indoor dry location)

Application Scenarios

Multi-Zone Commercial Office LightingInstall this led light strip receiver above drop-ceiling troffers or behind perimeter coves. Its 40m-50m wireless span allows facility managers to operate multiple zones from a central location without routing low-voltage control lines through partition walls.
Tunable White Architectural DetailingConnect a dual-channel CCT LED strip light to this wireless light receiver to transition architectural fixtures from 3000K daytime illumination to 2200K warm night lighting in gallery spaces and private residences.
Hospitality & Restaurant Mood IlluminationWire an RGB LED strip light directly into the output terminals to create dynamic color washes across bar counters, dining booths, and back-lit backdrops with reliable power-loss memory retention after daily shutdowns.

How to Control & Use This Controller

  1. Disconnect AC mains power from your LED power supply before making any electrical connections.
  2. Connect the constant-voltage DC12V or DC24V power supply output leads to the receiver INPUT screw terminals, observing correct positive (V+) and negative (V-) polarity.
  3. Connect the LED strip wiring to the OUTPUT screw terminals: use V+ as common anode positive, and wire the negative channels to CH1/CH2/CH3 for single-color runs, WW/CW for CCT strips, or R/G/B for multi-color strips.
  4. Inspect all wire terminations to ensure no stray copper strands bridge adjacent screw terminals.
  5. Turn on the AC mains power; the LED indicator on the receiver will illuminate to show normal standby status.
  6. Press the pairing (learning) key on the receiver, then immediately press the assigned zone or power button on your compatible RF remote control to pair the devices.
  7. Verify smooth dimming, color shifting, and zone on/off operation across your connected LED strip run.

⚠ Precautions

  • Voltage matching is mandatory: Ensure the input power supply DC voltage matches the working voltage of your connected LED strip lights exactly (DC12V in = DC12V out; DC24V in = DC24V out).
  • Do not exceed the electrical capacity: Current must not exceed 3A on any single channel or 9A across all three channels combined (108W at 12V, 216W at 24V).
  • Observe common-anode polarity when terminating 4-wire RGB or 3-wire CCT LED strip lights; reversing polarity will prevent illumination.
  • This unit is rated IP20 for dry indoor environments; when installing outdoors or in damp basements, place the receiver inside an IP65 or higher rated junction enclosure.
  • Do not encase the receiver entirely inside grounded, solid metal enclosures, as heavy shielding reduces the RF wireless range from 50m down to less than 5m.

What's in the Box

  • ✓1 x BinColor BC-R3M 3-Channel LED Wireless Receiver
  • ✓1 x User Wiring and Operation Instruction Manual

Frequently Asked Questions

Q: What types of LED strip lights work with the BC-R3M receiver?

A: This led strip light receiver works with constant-voltage DC12V and DC24V LED strip lights in three wiring configurations: up to three individual single-color strips, one dual-channel tunable white (CCT) strip, or one RGB strip.

Q: How much total electrical wattage can this receiver handle?

A: The receiver supports 3A per channel across 3 channels (9A total), delivering a maximum load of 108W when powered by a 12V driver or 216W when powered by a 24V driver.

Q: Does this receiver require a separate power supply?

A: Yes, this unit is a low-voltage receiver and dimmer that sits between your driver and your LED strip; it requires an external constant-voltage DC12V or DC24V power supply matching your strip voltage.

Q: What is the operational wireless control range?

A: The built-in RF module receives control signals up to 40m to 50m in open line-of-sight environments, and typically 20m to 30m when passing through standard interior drywall partitions.

Q: Does the BC-R3M remember its settings after a power failure?

A: Yes, the receiver incorporates non-volatile memory that retains your last active brightness, color temperature, or static RGB hue when AC line power is interrupted.

Q: How do I expand my LED installation if my total load exceeds 9A?

A: To run lighting loads beyond 9A (108W at 12V or 216W at 24V), add a compatible constant-voltage PWM data repeater / amplifier to take output signals from the BC-R3M and distribute supplementary power from an additional driver.

Q: Can multiple receivers be synced to a single wireless remote?

A: Yes, multiple BC-R3M receivers can be coded to the same wireless handheld or wall-mounted RF remote transmitter for simultaneous single-zone or synchronized multi-zone operation.

Q: What dimming resolution does this receiver provide?

A: The unit utilizes 4096-level (12-bit) PWM dimming technology, preventing visible stepped jumps or flickering when dimming down to low brightness thresholds.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.