Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-18 | ID: 7368

R4M 4-Channel LED Strip Wireless Light Receiver For T Series Remotes

MODEL: BC-R4M
Price based on selections below:
$23.98
Select Input Voltage:DC12V-24V (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The BinColor BC-R4M is a 4-channel constant voltage LED wireless receiver engineered to drive low-voltage flexible lighting loads with smooth, flicker-free dimming across 4096 grayscale levels. Operating on DC 12V to DC 24V inputs, this compact unit delivers up to 5A per channel (20A combined capacity), supporting up to 240W at 12V or 480W at 24V. Whether you configure it for four independent single-color circuits, two tunable white CCT runs, one RGB group, or one four-color RGBW LED strip setup, the BC-R4M interprets wireless RF commands from up to 40m to 50m away in unobstructed spaces. As part of a synchronized multi-zone control series, it communicates exclusively with BinColor T series wireless remotes (T1, T2, T3, T4, T5, T6, T7, and T8) to orchestrate responsive multi-room or multi-fixture architectural schemes across residential and commercial properties.

Core Capabilities and Engineering Highlights

Flexible 4-Channel Multi-Mode Architecture

Supports wiring for 4 single-color channels, 2 tunable white circuits, 1 RGB circuit, or 1 RGBW circuit on a single unit.

20A Combined Output Capacity

Supplies 5A per channel continuously, driving 240W of total LED load at 12V DC or 480W at 24V DC.

4096-Level Precision Grayscale Dimming

Smooth logarithmic light level shifts eliminate visible stepping and camera-detected strobe across all color modes.

Long-Range RF Reception

Maintains dependable wireless signal acquisition at distances of 40m to 50m from paired transmitters.

BinColor T-Series Remote Compatibility

Pairs directly with handheld and wall-mounted BinColor transmitters including T1, T2, T3, T4, T5, T6, T7, and T8.

Broad Industrial Operating Temperature

Functions reliably in ambient operational conditions ranging from -30 deg C to +55 deg C.

Technical Performance and System Integration

  • Delivers 4096 grayscale steps per channel for smooth color mixing without abrupt brightness transitions.
  • Accepts standard constant voltage DC 12V to DC 24V inputs from an external LED power supply.
  • Accommodates up to 4 zones of architectural dimming when integrated into commercial or residential layouts.
  • Houses heavy-gauge screw terminal blocks inside a 176 mm x 46 mm x 30 mm enclosure for clean raceway mounting.
  • Features persistent memory retention to restore the previous lighting state automatically following power interruptions.

Technical Specifications

ParameterDetails
Model / SKUBC-R4M
Manufacturer BrandBinColor
Product ClassificationConstant Voltage LED Wireless Receiver
Input Voltage RangeDC 12V - DC 24V
Output Channels4 Channels
Current Output Per Channel5A / Channel
Total Maximum Current20A (Combined across active channels)
Maximum Load Capacity (12V)240W (60W per channel x 4 CH)
Maximum Load Capacity (24V)480W (120W per channel x 4 CH)
Dimming Resolution4096 Grayscale Levels
Supported LED Configurations4x Single Color, 2x CCT Tunable White, 1x RGB, 1x RGBW
Wireless Operating Range40m to 50m (Open line-of-sight)
Compatible TransmittersBinColor T Series Only (T1, T2, T3, T4, T5, T6, T7, T8)
Wiring Connection MethodScrew Down Terminals (Common Anode V+)
Housing Dimensions176 mm (L) x 46 mm (W) x 30 mm (H)
Operating Temperature Range-30 deg C to +55 deg C
Power Loss MemoryYes (Stores state on power cut)

Application Scenarios

Residential 4-Zone Accent LightingDeploy separate BC-R4M units to control cove lighting, under-cabinet fixtures, toe kicks, and display shelving independently across four distinct living spaces. Connect individual channels to an energy-efficient white COB LED strip setup for uniform ambient brightness.
Hospitality Color Temperature TuningWire dual channels on the receiver to a tunable white COB LED strip to adjust color temperatures from 2700K warm white during evening dinner service to 5000K crisp white during daytime operations across hotel lobbies and restaurants.
Commercial Entertainment and Venue RGB EffectsUtilize three channels of the BC-R4M paired with a dynamic RGB COB LED strip to supply rich color washes in bars, nightclubs, and private theater rooms. The 40m to 50m wireless range ensures strong signal delivery from booth-mounted remotes.
Architectural RGBW Perimeter and Display LightingRun an accent system using an RGBW COB LED strip to balance colored moods with dedicated white task lighting. For details on how channel configurations differ across specialized tapes, review our color mixing comparison guide.

How to Control & Use This Controller

  1. 1. Disconnect the main AC power source before mounting the hardware or touching any electrical terminals.
  2. 2. Connect your DC 12V or DC 24V power supply leads to the receiver INPUT screw terminals, matching positive (V+) and negative (V-) polarity.
  3. 3. Connect your LED strip light leads to the OUTPUT terminals: attach the common positive wire to V+ and the individual negative lines to channels 1, 2, 3, or 4 based on your strip type (Single color, CCT, RGB, or RGBW).
  4. 4. Restore power to the DC power supply; verify the power indicator LED illuminates on the BC-R4M housing.
  5. 5. Press the learning key (ID match button) on the BC-R4M receiver, then press the zone or power button on your compatible BinColor T-series remote (T1 through T8) within 5 seconds to complete wireless pairing.
  6. 6. Test dimming, dynamic color shifting, and zone on/off controls across your paired fixtures.
⚠ Precautions
  • Match voltage strictly: the DC power supply voltage must match the voltage requirement of the connected LED strip light (DC 12V in = DC 12V strip; DC 24V in = DC 24V strip).
  • Do not exceed the maximum current limit of 5A on any single channel or 20A across all combined channels.
  • This receiver is intended for dry indoor installations only; do not expose to moisture or rain.
  • This model is exclusively compatible with BinColor T series remotes (T1, T2, T3, T4, T5, T6, T7, T8) and does not pair with remotes from other product families.
  • Always verify wiring polarity (Common Anode V+) before energizing the system to avoid damaging the internal MOSFETs.

What's in the Box

  • ✓1 x BinColor BC-R4M 4-Channel LED Strip Light Receiver
  • ✓1 x User Instruction Manual

Frequently Asked Questions

Q: What LED strip light types can I connect to the BC-R4M receiver?

A: The BC-R4M features 4 output channels that can be configured to operate 4 single-color LED strip runs, 2 tunable white CCT runs, 1 RGB run, or 1 RGBW LED strip run.

Q: What is the maximum electrical load this receiver can drive?

A: Each channel supports up to 5A, with a maximum combined capacity of 20A across all channels. That equates to 240W total at 12V DC or 480W total at 24V DC.

Q: Which wireless remotes are compatible with the BC-R4M?

A: The BC-R4M works exclusively with BinColor T-series wireless controllers, including model numbers T1, T2, T3, T4, T5, T6, T7, and T8. It is not compatible with remotes from other brands or series.

Q: What is the effective wireless reception range of this receiver?

A: The BC-R4M detects remote signals up to 40m to 50m away in unobstructed environments. Physical walls, metal studs, and enclosed metal cabinets may reduce this operational distance.

Q: Does the BC-R4M remember its lighting settings after a power failure?

A: Yes, the receiver incorporates an internal non-volatile memory function that restores the last selected color, brightness level, and state once power is re-applied.

Q: How do I expand my installation if my total LED strip power exceeds 20A?

A: When your LED load exceeds 20A or 480W at 24V, install a compatible constant voltage power repeater/data amplifier downstream from the BC-R4M to power additional LED strip runs safely.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.