


| Select Input Voltage: | DC12V-24V (Base) |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
The BinColor BC-R4-2.4G is a 4-channel constant voltage led strip light receiver engineered for 2.4GHz wireless lighting setups in residential homes, hospitality venues, and architectural installations. Operating on DC 12V to DC 24V, this led wireless receiver provides up to 5A per channel (20A total output), delivering a combined load handling of up to 240W at 12V DC or 480W at 24V DC. It pairs directly with BinColor PX series touch panel controller units (including P1X, P2X, P3X, P4X, P5X, P6X, P7X, and P8X) over an RF transmission distance of up to 30 meters. Whether driving 4 channels of single color, 2 channels of tunable white (CCT), 1 channel of RGB, or 1 channel of RGBW strip lighting, the BC-R4-2.4G delivers smooth PWM output. Pair it with an appropriate LED power supply to manage multi-zone architectural and accent lighting reliably.
Drives 4 channels of single color, 2 channels of tunable white CCT, 1 channel of RGB, or 1 channel of RGBW constant voltage LED strip lighting.
Supports up to 5A per channel, handling total loads up to 240W at 12V DC and up to 480W at 24V DC.
Uses 2.4GHz RF wireless signal transmission to receive commands up to 30 meters away through interior partitions.
Pairs specifically with BinColor PX series wall-mount touch panels, including P1X, P2X, P3X, P4X, P5X, P6X, P7X, and P8X models.
Operates continuously within an ambient temperature span from -30 deg C to 55 deg C for unconditioned mechanical spaces.
Measures L176 x W46 x H30 mm with integrated mounting flanges for direct installation inside drop ceilings, millwork, and electrical enclosures.
| Parameter | Details |
|---|---|
| Product Model | BC-R4-2.4G |
| Product Category | Wireless LED Strip Light Receiver |
| Brand | BinColor |
| Input Voltage | DC 12V - DC 24V |
| Output Voltage | DC 12V - DC 24V (Constant Voltage) |
| Number of Channels | 4 Channels |
| Output Current | 5A per channel (Max 20A total) |
| Max Output Power at 12V | 240W (60W per channel) |
| Max Output Power at 24V | 480W (120W per channel) |
| Control Protocol | 2.4GHz RF Wireless |
| Receiving Distance | Up to 30 meters (unobstructed line of sight) |
| Compatible Transmitters | BinColor PX series panels (P1X, P2X, P3X, P4X, P5X, P6X, P7X, P8X) |
| Supported Load Configurations | 4x Single Color, 2x CCT, 1x RGB, or 1x RGBW |
| Dimming Method | PWM Constant Voltage |
| Operating Temperature | -30 deg C to +55 deg C |
| Product Dimensions | L176 x W46 x H30 mm |
| Terminal Type | Screw terminals (V+, V-, CH1, CH2, CH3, CH4) |
Q: What LED strip types can I connect to this wireless light receiver?
A: The BC-R4-2.4G features 4 output channels that can be configured to operate 4 individual single-color runs, 2 dual-channel tunable white (CCT) runs, 1 full-color RGB run, or 1 RGBW 4-channel run using constant voltage DC 12V-24V LED strip lights.
Q: What is the maximum electrical load this led strip light receiver can power?
A: Each channel supports up to 5A, giving a total capacity of 20A across all 4 channels. This equals a maximum load of 240W when powered by a 12V DC power supply, or up to 480W when powered by a 24V DC power supply.
Q: Which controllers and transmitters are compatible with the BC-R4-2.4G?
A: This receiver is designed to pair exclusively with BinColor PX series wireless touch wall panels, including the P1X, P2X, P3X, P4X, P5X, P6X, P7X, and P8X models using 2.4GHz RF communication.
Q: Can one BinColor PX panel control multiple BC-R4-2.4G receivers?
A: Yes. Multiple BC-R4-2.4G receivers can be synchronized to the same wireless touch panel or assigned to separate zone buttons on multi-zone models like the P5X or P8X.
Q: What is the effective wireless transmission distance?
A: The receiver operates reliably up to 30 meters (approximately 98 feet) in open spaces. Typical indoor wall partitions may reduce this range depending on building materials such as concrete or metal framing.
Q: Does the receiver remember its last operational state after a power outage?
A: Yes. The BC-R4-2.4G includes non-volatile memory that restores the previously active brightness level, color mode, and power state once input power returns.
Q: Does this unit require an external power supply to operate?
A: Yes. The BC-R4-2.4G does not plug directly into 110V or 230V AC mains; it requires a regulated constant-voltage DC 12V or DC 24V power supply wired between mains power and the receiver input terminals.