Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 808

3Pin/4Pin 10mm Wide Dual End with 15cm Long Cable LED Strip Solderless DIY Connector Adapter Conductor for WS2811 WS2812B SK6812 WS2813 WS2815 Addressable LED Flexible Strip Light

MODEL: CT-ACCESSORIE-001
Price based on selections below:
$0.98
Select Pins:3 Pin (Base), 4 Pin (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications
Simplify your custom lighting projects with our Dual-End Solderless Connector, the perfect solution for bridging gaps or navigating corners with your Addressable LED Flexible Strip Light. This connector features a 15cm (6-inch) cable between two easy-to-use clasps, eliminating the need for soldering and making connections quick and secure. Designed specifically for 10mm wide digital strips, it's an essential accessory for creating seamless, professional-looking installations. 

Whether you're working with popular ICs like the WS2811, WS2812B, SK6812, or the dual-signal WS2813 and WS2815, this connector provides a reliable link to keep your lighting continuous and vibrant. Choose between 3-pin and 4-pin versions to perfectly match your strip's requirements.

Key Features

Effortless Solderless Installation

Features a simple flip-clasp design that securely bites into the strip's contact points, creating a strong connection in seconds without any soldering.

Flexible 15cm Bridge Cable

The 15cm wire provides ample length to cleanly route your LED strips around corners, over obstacles, or between separate surfaces.

3-Pin & 4-Pin Versions Available

Select the 3-pin model for single-data strips or the 4-pin model for dual-signal strips like WS2813, WS2815, ensuring a perfect match for your project.

Product Specifications

Parameter Details
Product Model CT-ACCESSORIE-001
Connector Type Strip-to-Strip, Dual End with Cable
Pin Options 3-Pin, 4-Pin
Compatible Strip Width 10mm
Cable Length 15cm / 6 inches
Pin Material Copper Plated
Housing Material Plastic
Installation Solderless
Compatible ICs WS2811, WS2812B, SK6812, WS2813, WS2815, and similar
Waterproof Rating Non-waterproof
Wire Color Red (VCC), Green (DAT), White (GND)
Reusable Yes

Application Scenarios

Seamless Corner Transitions Achieve clean 90-degree turns for under-cabinet lighting, cove lighting, or display case illumination without risking damage by bending the LED strip. The 15cm cable allows for a perfect, stress-free corner connection.
Bridging Gaps and Obstacles Easily run your lighting across gaps, such as between kitchen cabinets, over sink basins, or around window frames. This connector lets you continue a single strip run where a solid strip can't go.
Custom LED Projects & Repairs Ideal for DIY enthusiasts creating custom lighting fixtures or layouts. It's also a fast and effective way to repair a damaged section of an addressable LED strip by cutting out the break and splicing in a new piece.

How to Use This Solderless Connector

  1. Ensure the power to your LED strip is turned off before starting.
  2. Gently open the white flip-clasp on one end of the connector.
  3. Carefully slide the end of your 10mm LED strip into the connector. Make sure the copper solder pads on the strip align and sit directly underneath the connector's metal pins.
  4. Firmly snap the clasp shut. You should feel a click as it locks in place.
  5. Repeat steps 2-4 for the second LED strip on the other end of the connector.
  6. Briefly turn the power on to test the connection and ensure all LEDs light up correctly before final installation.
⚠ Precautions
  • This connector is for indoor use only and is non-waterproof.
  • Do not pull forcefully on the cable, as this can damage the internal connections.
  • Double-check that the positive, negative, and data lines on your strip align with the corresponding pins on the connector.

What's in the Box

  • ✓1 x 3Pin/4Pin 10mm Dual End Solderless Connector with 15cm Cable
© 2026 SuperLightingLED. All specifications are subject to change without notice.