| Availability | In Stock |
|---|---|
| Condition | Brand New |
Delivers a robust 15A maximum current, supporting up to 360W of 24V single-color LED lighting on a single channel.
Faithfully reproduces the PWM signal from the master controller, ensuring seamless dimming and effects across all amplified sections.
Solves common issues in long LED runs, such as dimming and flickering, by injecting fresh power into the line.
Cascade multiple SYS-T2 amplifiers in series to extend your lighting installation to virtually any length, with each amplifier powered locally.
Designed to work perfectly as a subordinate device with Miboxer SYS-T1 host controllers and other master units.
Engineered for consistent operation in demanding environments with a wide working temperature range of -20 to 60°C.
| Parameter | Details |
|---|---|
| Product Model | SYS-T2 |
| Input Voltage | DC 24V |
| Output Voltage | DC 24V |
| Output Current | Max 15A |
| Output Power | Max 360W |
| Channels | 1 Channel (Single Color) |
| Control Method | PWM Signal Amplification |
| Working Temperature | -20~60°C |
| Connection Type | Screw Terminals |
PDFSYS-T2
Q: What is the main purpose of the SYS-T2 amplifier?
A:The SYS-T2 is used to extend the length of DC24V single-color LED strip installations by boosting the control signal and providing fresh power, which prevents dimming and flickering over long distances.
Q: Can I use this as a standalone controller for my LED strips?
A:No, the SYS-T2 is a subordinate amplifier. It requires a master controller, like the Miboxer SYS-T1, to provide the dimming or on/off signal that it then amplifies.
Q: My long LED strip is dim at the end. Will this fix it?
A:Yes, this is exactly what the SYS-T2 is designed to solve. By installing it where the light starts to dim and connecting it to its own power supply, you restore full brightness to the next section of the strip.
Q: How many amplifiers can I connect in a series?
A:You can cascade multiple SYS-T2 amplifiers one after another to create extremely long lighting runs. Each amplifier in the chain will require its own appropriately sized DC24V power supply.
Q: What type of LED lighting is this compatible with?
A:This amplifier is designed specifically for single-channel, constant voltage DC24V lighting, such as standard white or other single-color LED strips.
Q: How do I choose the right power supply for the SYS-T2?
A:You need a DC24V power supply. To find the correct amperage, calculate the total wattage of the LED strip segment connected to the amplifier's output, then add 20% for a safety margin. The power supply must be able to provide at least that much power.