Spec Sheet - CT-ACCESSORIE-004

Availability	In Stock
Condition	Brand New

Ensure a secure, long-lasting connection for your lighting project with the Male/Female 3-Terminal Waterproof Connector Cable. Specifically designed for 3-pin CCT LED strips, this connector set is built to withstand challenging environments. Featuring robust 20AWG wiring, it provides a more reliable current path than thinner alternatives, minimizing voltage drop over extensions. The push-in, interlocking male and female ends create a tight, waterproof seal, making it the ideal choice for outdoor landscape lighting, bathroom installations, or any application where moisture and durability are key concerns. This led strip light connector simplifies the process of extending or creating breaks in your CCT strip runs without compromising performance or safety.

Key Features

Waterproof Design

Features a secure, interlocking design with gaskets to protect connections from moisture, dust, and debris in outdoor or damp locations.

Heavy-Duty 20AWG Wire

Utilizes 0.5mm² (20AWG) wire, which is thicker and more durable than standard 22AWG, ensuring better current handling and reduced voltage drop.

3-Pin CCT Compatibility

Perfectly suited for dual-white (CCT) LED strips and other 3-wire lighting applications, providing reliable connections for power, warm white, and cool white channels.

Secure Male-Female Connection

The push-in male and female ends lock together firmly, creating a stable and reliable electrical and mechanical bond that resists pulling apart.

Versatile Extension

With a combined length of 40cm (15.7 inches), this pair is ideal for bridging gaps, navigating corners, or adding a disconnect point in your LED strip layout.

Male Female 20AWG 3 Terminal Waterproof Connector Cable Black for CCT LED Strips Light - photo 1 — The male and female ends of the 3-pin 20AWG waterproof connector cable.

Product Specifications

Parameter	Details
Product Model	CT-ACCESSORIE-004
Connector Type	3-Terminal Male & Female Pair
Wire Gauge	20AWG
Wire Cross-Section	0.5mm²
Color	Black
Protection	Waterproof
Connection Method	Push-in, interlocking
Individual Cable Length	20cm / 7.87 inches
Total Assembled Length	40cm / 15.7 inches
Compatibility	Designed for 3-Pin CCT LED Strips

Application Scenarios

Outdoor and Landscape Lighting Create durable, weatherproof connections for CCT LED strips used in gardens, patios, decks, and architectural facade lighting. The waterproof seal protects against rain, sprinklers, and humidity.

Kitchen and Bathroom Installations Safely extend or connect CCT under-cabinet lighting, vanity backlighting, or shower accents. The robust, waterproof design provides peace of mind in areas prone to steam, splashes, and moisture.

Custom LED Fixtures Incorporate a reliable quick-disconnect point into custom-built fixtures. The 20AWG wire ensures it can handle the power demands of high-density CCT LED strips without performance loss.

How to Install & Use This Connector

Ensure the power supply to your LED strip is disconnected before starting.
Prepare the ends of your 3-pin CCT LED strip and the corresponding wires on the connector cable by stripping a small amount of insulation.
For the most reliable and secure connection, solder the three wires from the connector cable to the corresponding copper pads on your CCT LED strip (+, WW, CW).
Insulate each solder joint individually with heat shrink tubing to prevent short circuits.
Once the connector is securely attached to your strip light segment, simply push the male and female ends together until they lock firmly.
Ensure the threaded cap (if included) is tightened to complete the waterproof seal.

⚠ Precautions

This is a 3-pin connector. Do not attempt to use it with 2-pin single color, 4-pin RGB, or 5-pin RGBW strips.
Always verify the polarity and wire order (+, WW, CW) of your LED strip matches the connector wiring before soldering.
While the connector itself is waterproof, the connection point to the LED strip must be properly sealed (e.g., with silicone and heat shrink) to maintain the waterproof integrity of your entire lighting run.

What's in the Box

✓1 x 3-Pin Male Waterproof Connector Cable (20cm)
✓1 x 3-Pin Female Waterproof Connector Cable (20cm)

Frequently Asked Questions

Q: What kind of LED strips is this connector for?

A:This is a 3-pin connector specifically designed for dual-white CCT (Correlated Color Temperature) LED strips, which have positive, warm white, and cool white channels.

Q: Can I use this for 4-pin RGB LED strips?

A:No, this connector has only 3 pins and will not work with 4-pin RGB or 5-pin RGBW/RGBCCT strips. Please browse our 4-pin and 5-pin connector categories for compatible options.

Q: What is the benefit of 20AWG wire?

A:20AWG wire is thicker than the more common 22AWG or 24AWG wire. This allows it to carry more current with less resistance and voltage drop, making it ideal for longer runs or higher-power LED strips.

Q: Is this a solderless connector?

A:No, this connector is designed to be soldered to the LED strip's copper pads for the most durable and reliable connection. The male and female ends of the cable connect to each other without solder.

Q: How long is the cable?

A:The set includes one male and one female cable, each 20cm long. When connected together, they create a total extension of 40cm (about 15.7 inches).

Q: How waterproof is this connector?

A:The interlocking connection between the male and female plugs is designed to be waterproof and suitable for outdoor and damp environments. To ensure your entire system is waterproof, you must also properly seal the point where the wires are soldered to the LED strip.

Male Female 20AWG 3 Terminal Waterproof Connector Cable Black for CCT LED Strips Light