| Select Length: | 16.4ft (5 meters) (Base), 32.8ft (10meter) Roll |
|---|---|
| Select PCB Color : | White Background (Base), Black Background (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets |
| Availability | In Stock |
| Condition | Brand New |
1. Environmental protection and safety: Use high-quality high-brightness SMD 5050 LED. It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC 5V, 12V power supply, high safety, and reliability.
2. Rich and diverse colors can be adjusted arbitrarily through the controller according to customer needs.
3. Lifespan: the average life span is up to 50,000 hours.
4. Cutting and welding are convenient and free: each group of LEDs can form a loop, which can be arbitrarily cut and welded along the upper tangent line to meet the needs of various light strip lengths required by customers.
5. Soft: Using a soft FPCB board as the substrate, it can be docked, bent, cut, and fixed on the uneven surface at will.
6. Light and thin: suitable for installation in narrow spaces.
Standards and Certifications
Specifications
Model: LC-6812X96XM12X-5V
Input voltage: 5 (V)
SMD: 6812
LED lamp beads: 96LEDs
Beam angle: 120 degrees
Power factor: 28.8W/M
Lifespan: 50000 (H)
board Width: 12 (mm)
IP Rating: IP20/65/67
Certification: ce, ROHS
Color temperature: 3000K
RSI: 80
Power: 28.8W/M
Length: 5M/16.4ft
board material: FPCB
Size: 450*330*310mm
How to connect and control
Similar to WS2812B LED strip, the SK2812 led strip has 3 wires for sending data - one V+ pin, one GND pin, and one data pin. That means you need 3 pins to control strip. Because the data is separated, you can use any processor speed or type to control these strips. an addressable RGB LED strip is a long flexible strand of LEDs each of which can be individually set to a certain color (hence: addressable). By varying the level of red, green and blue (RGB) per LED many color combinations can be made you can use any processor speed or type to control these strips, you can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip.
This strip comes as a single full meter with a 3-pin JST SM connector on each end. Every LEDs segment can be cut. Solder to the 0.1" copper pads and you're good to go.you can also connect strips together to make them longer. To power this strip, you need a 5V power supply.
This is our recommended SPI and Programmable controller link. We are a professional lighting system company, you can tell us your lighting project requirements, we will recommend the most reasonable lighting solutions for you. If you need a customized lighting scheme, please feel free to contact me.
