Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 4025

Solder-Free White Buckle PCB to PCB 3-Pin Quick Connector For 10mm Wide Dual Color or Addressable LED Strips Cutting or PCB Assembly

MODEL: DC-ACCESSORIE-019
Price based on selections below:
$0.59
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create seamless, custom-length lighting runs with our 3-Pin Solder-Free Quick Connector. Designed specifically for joining two sections of 10mm wide PCB strip lights, this connector eliminates the need for soldering, making installations faster and cleaner. Its compact, buckle-style design ensures a secure and reliable connection between cut segments of your LED tape. This connector is the ideal solution for extending runs, repairing damaged sections, or utilizing off-cuts of 3-pin CCT dual color LED strips and certain addressable LED strips like WS2811. Achieve a professional, continuous line of light without any special tools or technical skills.

Key Features

Effortless Solder-Free Connection

Simply open the buckle, insert the strip ends, and snap it shut for a secure connection in seconds, no soldering required.

Specific 3-Pin Compatibility

Engineered for 10mm wide 3-conductor LED strips, including tunable white CCT and digital addressable strips.

Seamless Strip-to-Strip Design

Connects two strip light segments directly at the PCB level, creating a continuous, low-profile run.

Reliable & Secure Hold

The durable white buckle clamps down firmly on the strip, ensuring the copper contacts maintain a stable connection.

Product Specifications

ParameterDetails
Product ModelDC-ACCESSORIE-019
Connector TypeStrip to Strip (PCB to PCB)
Pin Quantity3-Pin
Compatible PCB Width10mm
Connection MethodSolder-Free, Buckle-Style
Housing MaterialPlastic
Contact MaterialCopper
Compatible Strip TypesNon-Waterproof IP20

Application Scenarios

Custom Under-Cabinet Lighting Join leftover strip pieces to create perfectly sized lighting lengths for kitchen cabinets, shelves, or display cases. This connector allows you to bridge small gaps or extend a run without wasting any part of your LED strip.
Architectural Cove Lighting When installing long runs of CCT or addressable LED strips in ceiling coves or architectural details, this connector provides a quick and reliable way to link multiple reels or custom-cut sections together for a seamless effect.
LED Strip Repair and Modification Easily repair a strip light that was accidentally cut or damaged. Simply remove the broken section and use this connector to join the two healthy ends back together, restoring full functionality to your lighting setup.

How to Use This Connector

  1. Ensure your LED strip is powered off before starting.
  2. Make a clean, straight cut along the designated cutting line on your 10mm 3-pin LED strip.
  3. Gently pry open the white buckle on one side of the connector.
  4. Carefully slide the end of the LED strip into the connector, making sure the copper pads on the strip slide underneath the metal contact pins inside the connector.
  5. Verify that the polarity markings on the strip (+, Data, GND) align with the corresponding channels of the connector.
  6. Press the buckle down firmly until you hear it snap shut. This secures the strip in place.
  7. Repeat steps 3-6 for the other LED strip segment on the opposite side of the connector.
⚠ Precautions
  • This connector is designed for non-waterproof (IP20) LED strips only. It will not work with strips that have a silicone or epoxy coating.
  • Double-check the polarity alignment before closing the buckles. Incorrect wiring can prevent the strips from lighting up or cause damage.
  • Ensure the strip is fully inserted for a reliable connection. A partial insertion may result in flickering or no light.
  • This connector is intended for straight-line connections. Do not bend it at a sharp angle.

What's in the Box

  • ✓1 x Solder-Free White Buckle 3-Pin Quick Connector

Frequently Asked Questions

Q: Will this connector work with waterproof or weather-resistant LED strips?

A:No, this connector is designed exclusively for use with non-waterproof (IP20) LED strips that have exposed copper pads.

Q: What types of 3-pin LED strips are compatible?

A:This connector is compatible with any 10mm wide, 3-pin LED strip, such as CCT (dual white) tunable strips and single-signal addressable LED strips like WS2811.

Q: Do I need any tools to install this connector?

A:No tools are required. The installation is completely solder-free; you just need to snap the buckles shut by hand.

Q: Can I use this to make a 90-degree corner turn?

A:No, this is a straight strip-to-strip connector for creating longer, continuous runs. For corners, you would need a dedicated L-shaped connector.

Q: How do I ensure the connection is secure and reliable?

A:Make sure your cut is clean, the strip is inserted all the way under the contact pins, and the polarity is correctly aligned before snapping the clasp shut.

Q: Is there a limit to how many connectors I can use in one run?

A:While you can use multiple connectors, be mindful of voltage drop over very long distances. For extensive runs, it's best practice to power the strip from multiple points.

© 2026 SuperLightingLED. All specifications are subject to change without notice.