Do I need any tools or soldering to use this?

No, this is a completely solderless connector. You do not need any special tools; just open the clasp, insert the strip, and snap it shut.

Which LED strip models are compatible?

This connector is designed for 2-pin single color LED strips using common SMD chips like 3528, 2835, 5050, and 5630, as long as the PCB width is 5mm, 8mm, or 10mm.

How long is the wire attached to the connector?

The attached pigtail wire is approximately 15cm (about 6 inches) long, providing ample length for connecting to a power supply or extension cable.

Spec Sheet - SC-ACCESSORIE-007

Select PCB Width:	8mm (0.31in) (Base), 10mm (0.39in) (Base), 5mm (0.2in) (Base)
Availability	In Stock
Condition	Brand New

Create clean, reliable power connections for your lighting projects with our 2-Pin Single-Head Solderless Connector. This essential accessory is designed to bridge a single color LED strip light to a power wire, eliminating the need for soldering and complex wiring. Its intuitive snap-down design allows for a fast, secure, and reusable connection, making it perfect for DIY enthusiasts and professional installers alike.

Available in three sizes to perfectly match 5mm, 8mm, or 10mm wide PCBs, this strip-to-wire 2-pin LED connector is the ideal solution for creating custom-length power leads for under-cabinet lighting, cove accents, and other bespoke installations. Each led strip connector 2 pin comes with a pre-attached 15cm wire, ready to connect to your low-voltage power supply.

Key Features

Solderless Snap-Down Design

Achieve a secure electrical connection in seconds. Simply open the clasp, insert the strip, and snap it shut for a firm, reliable hold.

Versatile PCB Compatibility

Available in three distinct sizes to ensure a perfect fit for 5mm, 8mm, and 10mm wide 2-pin single color LED strips.

Reusable & Damage-Free

The high-quality clasp can be opened and re-closed multiple times, allowing for adjustments and reuse without damaging the LED strip.

Pre-Attached Power Lead

Includes an integrated 15cm (6-inch) 2-conductor wire, providing a ready-to-use pigtail for connecting to power sources or extension cables.

Broad Strip Support

Compatible with standard density SMD LED strips (IP20, 5050/2835/etc.).

Product Specifications

Parameter	Details
Product Model	SC-ACCESSORIE-007
Connector Type	Single-Head, Strip-to-Wire
Pin Count	2-Pin
Available PCB Widths	5mm (0.2in), 8mm (0.31in), 10mm (0.39in)
Compatible Strip Types	Single Color SMD 5050, 5630, 3528, 2835, ect.
Wire Length	Approx. 15cm / 6 inches
Connection Method	Solderless, Snap-down Clip
Max Current	4A DC
Reusable	Yes
Materials	Plastic, Metal

Application Scenarios

Custom Under-Cabinet Lighting Easily create power leads for custom-cut lengths of LED strips to perfectly illuminate kitchen counters, workshops, or display shelves. The solderless design makes installation in tight spaces clean and simple.

Architectural Accent & Cove Lighting When installing single color LED strips in coves, alcoves, or for architectural highlighting, these connectors provide a quick and reliable way to attach power feeds at the start of a run.

LED Strip Repairs and Modifications Quickly replace a damaged factory-installed connector or add a new power input to a salvaged piece of LED strip without needing a soldering iron. The reusable clip makes it ideal for prototyping and testing layouts.

How to Use This 2 Pin LED Light Connector

Ensure your power supply is disconnected before starting.
Select the connector size (5mm, 8mm, or 10mm) that matches the width of your LED strip's circuit board.
Gently lift the white hinged cover on the connector to open the clasp.
If using a waterproof strip, carefully peel or scrape away the silicone/epoxy coating from the top of the copper solder pads at the end of the strip.
Carefully slide the end of the LED strip into the connector, making sure the positive and negative copper pads on the strip align directly under the two metal pins inside the connector.
Press the hinged cover down firmly until it snaps securely shut. This action pierces the strip to create a solid connection.
Connect the red and black wires to the corresponding positive (+) and negative (-) terminals of your power source or dimmer.

2 Pin 5/8/10mm Single Head LED Fast Wire Cable Connector For 5050/5630 Single Color Flex LED Strips - photo 2

⚠ Precautions

Always double-check that the connector width matches your strip's PCB width for a secure fit.
Ensure the polarity of the wires (+/-) is correctly matched to your power supply to avoid damaging the LEDs.
These connectors are not recommended for very high-density strips (typically over 120 LEDs/meter) as the clip may not align with the smaller solder pads.

What's in the Box

✓1x 2 Pin Single Head LED Fast Wire Cable Connector

Frequently Asked Questions

Q: What is the difference between this single-head connector and a double-head connector?

A:This single-head connector is designed to connect an LED strip to a wire lead for power. A double-head connector is used to join two separate LED strips together, end-to-end.

Q: Can I reuse this 2 pin led strip light connector?

A:Yes, the clasp is designed to be opened and closed multiple times, making it fully reusable for different projects or adjustments.

Q: Will this connector work with waterproof (IP65/IP67) LED strips?

A:Yes, but you must first carefully remove the silicone or waterproof coating from the copper connection pads on the strip before inserting it into the connector.

2 Pin 5/8/10mm Single Head LED Fast Wire Cable Connector For 5050/5630 Single Color Flex LED Strips Light