DMX512 Waterproof LED Signal Amplifier DC12V-24V AMP-DMX-XL

IP66 Waterproof Protection

Features a fully sealed enclosure, making it ideal for outdoor installations exposed to rain, humidity, and dust.

Extend DMX Signal Range

Effectively boosts and regenerates the DMX signal, enabling reliable data transmission over cable runs longer than 300 meters (984 ft).

Support for Large Installations

Allows for the connection of up to 128 DMX-enabled lights or devices in a series after the amplifier, expanding your lighting network capacity.

Signal Integrity & Isolation

Functions as a DMX opto splitter, isolating the output from the input to protect your controller and fixtures from electrical faults and signal degradation.

Wide Voltage Compatibility

Operates on a flexible DC12V to DC24V power input, making it compatible with common low-voltage power systems for LED lighting.

Large-Scale Architectural Lighting Perfect for illuminating building facades, bridges, and monuments where DMX signal needs to travel long distances from the central controller to various fixtures around the structure, ensuring synchronized and error-free performance.

Outdoor Events and Staging An essential component for outdoor concerts, festivals, and theatrical productions. The IP66 rating ensures reliable operation in unpredictable weather, boosting the signal to stage lights, trusses, and effects equipment spread across a large venue.

Expansive Landscape and Park Lighting Ideal for complex landscape lighting designs in parks, resorts, and public gardens. Use it to extend control to DMX512 LED strips and fixtures along lengthy pathways or across wide areas without signal loss.

⚠ Precautions

• Always use a power supply that matches the DC12V-24V requirement of the amplifier.
• Ensure all connections are secure and waterproof, especially in outdoor environments. Use appropriate waterproof connectors or enclosures for cable splices.
• This device is a signal repeater; it does not alter DMX addresses. It simply passes the signal through.
• For best practice in DMX networks, a DMX terminator (120-ohm resistor) should be placed on the last fixture of the entire DMX chain.

Q: What is the difference between this DMX amplifier and a DMX splitter?

A:This unit functions as a single-channel DMX splitter or booster. It takes one DMX input and regenerates it to one strong output, while a multi-channel DMX splitter takes one input and provides multiple isolated outputs.

Q: When do I absolutely need a DMX signal amplifier?

A:You need an amplifier when your total DMX cable length exceeds 300 meters (984 feet) or when you have more than 32 devices on a single DMX line. This amplifier boosts the signal to prevent data loss and supports up to 128 devices after it.

Q: Is this DMX amplifier addressable?

A:No, this is a signal repeater and is not addressable. It transparently passes all 512 DMX channels from input to output without changing any data.

Q: Can this amplifier power my DMX lights?

A:No, this device only amplifies the DMX data signal. Your DMX lights will require their own separate power supplies.

Q: Why is an IP66 rating important for a DMX component?

A:The IP66 rating ensures the amplifier is protected from dust and high-pressure water jets, making it safe and reliable for permanent outdoor installations where it will be exposed to the elements.

Q: Can I use a standard DMX connector with this model?

A:This model comes with pre-wired pigtails. You will need to splice these wires to your DMX cable, using waterproof methods for outdoor applications.