Which pin count do I need for my DMX lights?

Most standard DMX lights use 3-pin connectors. Some professional fixtures use 5-pin. 4-pin and 6-pin are less common for DMX and are often used for fixtures that combine power and data. Always check your light fixture's manual to be certain.

Spec Sheet - DMX-XLR-MALE

Q: What is the difference between 3-pin and 5-pin DMX connectors?

3-pin is the most common for basic DMX512 control (Ground, Data+, Data-). 5-pin is the official DMX standard, with two extra pins intended for a secondary data link or other functions, though they are often unused in simple setups.

Q: Can I use this 3-pin XLR connector for audio microphones?

While it is physically identical to a 3-pin audio XLR connector, this product is specified and sold for DMX lighting control. For critical audio applications, we recommend using connectors specifically rated for audio to ensure proper impedance and shielding.

Q: What does the 'Just Connector' option include?

The 'Just Connector' option provides only the male XLR connector housing with solder cups, without any pre-attached wire. This is for users who prefer to solder their own custom cable directly to the connector pins.

Q: Do I need to solder this connector?

Yes. Both the 'Just Connector' version (soldering to the pins) and the pre-wired versions (soldering the wire ends) require soldering for a secure and reliable electrical connection.

Q: Is this DMX connector waterproof?

No, this is a standard XLR connector designed for indoor or dry, protected environments. It does not have an IP rating for water resistance.

Select Length:	3.28ft (1 meter) (Base), 16.4ft (5 meters), 6.56ft (2 meters), 9.84ft (3 meters), 32.8ft (10 meters), No Wire Cable, Just Connector
Select Pins:	6 Pins, 3 Pin (Base), 4 Pin, 5 Pin
Availability	In Stock
Condition	Brand New

Create robust and reliable connections in your professional lighting setup with the DMX Lighting System XLR Male Connector Wire. This essential component is the perfect solution for building custom-length DMX cables, repairing existing equipment, or creating pigtail connections for fixtures. With a wide selection of pin counts (3, 4, 5, and 6-pin) and the choice of a standalone connector or a pre-wired version up to 10 meters, you have the flexibility to tackle any project. Engineered for secure signal integrity, this male XLR connector ensures flawless communication between your DMX master decoder console and your lighting fixtures, making it a must-have for any technician's toolkit.

Key Features

Versatile Pin Configurations

Available in 3, 4, 5, and 6-pin options to support standard DMX512, DMX with RDM, or other custom multi-channel signal applications.

Flexible Wiring Options

Choose between a standalone connector for custom wiring or a pre-wired pigtail in multiple lengths from 1m to 10m for quick integration.

Secure Locking Design

Features a robust metal housing with a secure latching mechanism to prevent accidental disconnections during performances or events.

High-Quality Signal Transfer

Designed to maintain DMX signal integrity, ensuring reliable control of your lighting fixtures without data loss or interference.

DMX Lighting System XLR Male Connector — DMX XLR Male Connector with a pre-attached multi-conductor wire, ready for soldering.

Product Specifications

Parameter	Details
Product Model	DMX-XLR-MALE
Connector Type	XLR Male Connector
Pin Options	3-Pin, 4-Pin, 5-Pin, 6-Pin
Wire Length Options	Just Connector (No Wire), 1m (3.28ft), 2m (6.56ft), 3m (9.84ft), 5m (16.4ft), 10m (32.8ft)
Rated Voltage	< 50V
Housing Material	Durable Metal Alloy
Termination (Wired versions)	Pre-tinned wire ends for soldering
Compatibility	Standard DMX512 protocol devices

Application Scenarios

Stage & Theatrical Lighting Essential for creating custom data cables to link moving heads, PAR cans, strobes, and other stage fixtures to a lighting console. The secure locking mechanism ensures connections remain stable during dynamic performances.

Architectural & Commercial Installations Perfect for wiring permanent installations of DMX512 LED strips, wall washers, and other integrated lighting. The variety of cable lengths allows for clean, custom-fit connections back to controllers.

Equipment Repair & Maintenance An indispensable part for technicians to replace damaged or faulty male connectors on DMX fixtures, cables, and splitters, restoring functionality and ensuring reliable operation.

Custom DIY Electronics The 4, 5, and 6-pin versions are ideal for non-DMX projects requiring multi-line data and low-voltage power transmission, such as robotics, custom controllers, or sensor arrays.

How to Use This DMX XLR Male Connector

Select the connector with the correct pin count (3, 4, 5, or 6) that matches your DMX device and cable.
If using a pre-wired version, consult your device's manual to identify the function of each colored wire.
Strip a small amount of insulation from the ends of the wires on the cable or fixture you are connecting to.
Solder the corresponding wires from the XLR pigtail to your device's wires, ensuring a clean and strong solder joint for optimal signal transmission.
Use heat-shrink tubing over each individual solder joint to provide insulation and strain relief.
Plug the assembled male XLR connector into the female XLR port on your DMX controller or the previous light in your DMX chain, ensuring the latch clicks securely into place.

⚠ Precautions

Always double-check the pinout diagram of your specific equipment before soldering. Pin assignments can vary, especially for non-standard 4-pin and 6-pin applications.
This product is a component for soldering and requires appropriate tools and skills for proper installation. It is not a solderless or quick-splice connector.
Ensure the total voltage of the connected system does not exceed the connector's <50V rating.
This connector is intended for indoor or protected outdoor use and is not waterproof.

What's in the Box

✓1 x DMX XLR Male Connector (configuration as per your selection)

Frequently Asked Questions

Q: What is the difference between 3-pin and 5-pin DMX connectors?

A:3-pin is the most common for basic DMX512 control (Ground, Data+, Data-). 5-pin is the official DMX standard, with two extra pins intended for a secondary data link or other functions, though they are often unused in simple setups.

Q: Can I use this 3-pin XLR connector for audio microphones?

A:While it is physically identical to a 3-pin audio XLR connector, this product is specified and sold for DMX lighting control. For critical audio applications, we recommend using connectors specifically rated for audio to ensure proper impedance and shielding.

Q: What does the 'Just Connector' option include?

A:The 'Just Connector' option provides only the male XLR connector housing with solder cups, without any pre-attached wire. This is for users who prefer to solder their own custom cable directly to the connector pins.

Q: Do I need to solder this connector?

A:Yes. Both the 'Just Connector' version (soldering to the pins) and the pre-wired versions (soldering the wire ends) require soldering for a secure and reliable electrical connection.

Q: Is this DMX connector waterproof?

A:No, this is a standard XLR connector designed for indoor or dry, protected environments. It does not have an IP rating for water resistance.