Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-02 | ID: 6036

24V Pixel WS2811 Black COB RGB LED Strip Light

MODEL: FCOB-24V-WS2811X630-B
Price based on selections below:
$37.98 $30.9818% off
Select Kit:LED Strips (Base), LED Strips + Controller + Power Supply
Select LED Quantity:630chips/m (Base)
Select Length:16.4ft (5 meters) (Base)
Select PCB Width:10mm (0.39in) (Base)
Select Waterproof Rating:Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets, Outdoor Silicone Tube IP67 - Adhesive Back
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

10mm wide black flexible printed circuit board 24V low voltage addressable RGB color pixel WS2811 COB continuous spotless light tape, five meters in a roll. 630 LED chips evenly distributed on the black PCB, using chip-on-board technology, with the WS2811 controller to present linear dotless fantastic color changes and chases. 71.43mm (2.8 inch) cuttable, use 3pin COB connector for connection again. 14 pixels per meter, 1 WS2811 pixel controls a segment of 71.43mm or 2.8" length. 

This black COB led strip uses the widely compatible WS2811 IC chip to adapt to most data RGB controllers such as SP638E (controller in the kit), SP107E, DMX SPI RGB decoders, etc. Available in IP20 indoor and IP67 outdoor options, allowing you to add dynamic lighting ambiance to any location.

[ VIDEO: Watch on YouTube ]

 

Product Specification

LED Strip Type:  24V Pixel WS2811 Black COB RGB LED Strip Light
LED Chip:  COB + WS2811
Input Voltage:  DC 24V
Power:  12W/m
PCB Width:  10mm/0.4"
LED Quantity:  630 chips per meter, 192 per foot
IC Quantity: 14 pixels per meter, 70 per roll
Cut Unit:  71.43mm/2.8"
Strip Length:  5m/16.4ft
Waterproof Rating:  Non-waterproof IP20 / Outdoor Waterproof IP67 
Lumen:   1260lm/m
Beam Angle:  180°
Working Temperature:  -20℃~+50℃
Lifespan:  50,000+ hours

 

Wiring Diagram - How To Wire WS2811 COB RGB LED Strip Light?

This pixel WS2811 black COB RGB led strip needs an SPI controller and a 24V led power supply to work, the wiring is like the below image. 

If you choose the kit products, we will send you 1pcs 5m/16.4ft 24V WS2811 Black COB LED Strip Light, 1pcs SP638E Bluetooth Music Mini LED SPI Controller, and 1pcs Meanwell LRS-100-24 100W 4.16A led power supply (AC plug is included). 

addressable led strip wiring diagram

 

24V Pixel WS2811 Black COB Addressable RGB LED Strip Light

© 2026 SuperLightingLED. All specifications are subject to change without notice.