3-Pin CCT LED Strips Parts

Display all products in this category 1 to 14 (of 14 products)

(0)
Model:CT-ACCESSORIE-010
- Length:3.28ft/1m
- Wire Size: 20Awg 3*0.5mm
- Core material: Tinned Copper
Various Options In Stock
$1.89The power cord uses oxygen-free tinned copper wire, and each wire contains multiple high-quality pure copper wires twisted, low resistance, and lasting stability. Resistance directly affects the consumption at this point in the transmission process, and the smaller the resistance, the better. Using PVC insulation material, high tensile strength, super soft, not easy to break. It is suitable for...

(0)
Model:HV-ACCESSORIE-3PIN
- AWG:18/20 optional
- Length:3.28ft/1m
- Shell Color:White/Black
- Core material: oxygen-free copper
Various Options In Stock
$1.69The waterproof power cable is made of imported high-strength plastic, which has good flexibility and is not easy to break, and uses PVC protective sleeves inside and outside, with double protection of the core, and stable transmission. The power cord is suitable for outdoor CCT LED light strip , and addressable led strips , but it cannot be prevented from underwater. When the length of the led...

(0)
Model:CT-ACCESSORIE-005
- Wire Size:18/20AWG
- Length:3.28ft/1m
- Core material:oxygen-free copper
Various Options In Stock
$1.39The power cord uses oxygen-free tinned copper wire, and each wire contains multiple high-quality pure copper wires twisted, low resistance, and lasting stability. Resistance directly affects the consumption at this point in the transmission process, and the smaller the resistance, the better. Using PVC insulation material, high tensile strength, super soft, not easy to break. It is suitable for...

(0)
Model:CT-ACCESSORIE-COB
- Type: Board to board
- PCB Width: 10mm
- LED Strip: CCT COB
- Wire Length: 6.7in/170mm
- Wire Gauge: 20AWG
Various Options In Stock
$1.39COB led connector for 10mm IP20 nonwaterproof CCT COB led strip, board to borad type, user-friendly, quick and safe, easy to use. This 3pin COB led strip connector is non-waterproof. If it fails, check if the COB led strip light is good and positive and negative are not reversed.

(0)
Model:CT-ACCESSORIE-COB01
- Type: Board to wire
- PCB Width: 10mm CCT COB
Various Options In Stock
$0.98COB led strip connector for 10mm nonwaterproof IP20 CCT COB led strip light, board to wire type, user-friendly, quick and safe, easy to use. This 3pin COB led connector is non-waterproof. If it fails, check if the COB led light strip is good and the positive and negative are not reversed.

(0)
Model:CT-ACCESSORIE-001
- Length:15cm/6 inches
- Connector Type: 3pin/4pin
- Material: Pins are copper plated
- Type: PCB TO PCB solderless type
Various Options In Stock
$0.98Widely used for WS2811 WS2812B SK6812 WS2813 WS2815led flexible strip (Can not support 144LED/m led strip) Solderless design connects two ends of strips Led strip width: 10mm. Wire length: 15cm Compact and lightweight, but very practical. Package includud:1pcs 3pin dual end connector/ 1pcs 4pin connector Features: Length: 15cm/6 inches Connector Type: 10mm 3pin/4pin connector Suitable...

(0)
Model:CT-ACCESSORIE-002
- PCB Width:10mm
- Applicable Color: CCT LED Strips
- Pins: 3-Pin
- Packing: 1 Piece
Various Options In Stock
$0.59The LED fast connector can easily connect two LED light strips without welding, which can solve a lot of your problems. It is simple and convenient for people without welding experience, saving time and money. You can use them to bend your led light strip around corners or to extend it past an obstacle. Our connectors feature an easy solderless clip connection and come in lengths from 6 inches to...

(0)
Model:CT-ACCESSORIE-006
- PCB Width:10mm
- PCB Type: L Cross
Various Options In Stock
$0.99You need to simply slot strip light into connector and close (no need for soldering). (Can not support 144LED/m led strip) L Shape 3 Pins Connector 10mm is very safe to use. (Can not support 144LED/m led strip) It is for an LED strip 10mm wide. The product is High Quality & High-Cost Performance & High Security. for an LED tape DIY project is Compatible with both waterproof and...

(0)
Model:CT-TACCESSORIE-002
- PCB Width: 10mm
- Shape: T type
- Applicable Color: CCT LED Strips
- Material: high-temperature silicone
Various Options In Stock
$0.99Type T is used for 10mm wide CCT Color Temperature LED light strips , used for 3-way fast shunt connection, only need to insert the strip light into the connector and clamp the cover, without welding. Use the LED solderless connector to install the light bar at the turn to make the whole layout neat and beautiful. Superlightingled's T-connector is made of sturdy fireproof material, which is...

(0)
Model:CT-+ACCESSORIE-002
- PCB Width:10mm
- Shape:+ type
- Production Process:cold pressing
- Applicable Color: CCT LED Strips
Various Options In Stock
$0.98The + shape LED fast connector can easily connect two LED light strip without welding, which can solve a lot of your problems. It is simple and convenient for people without welding experience, saving time and money. You can use them to bend your led light strip around corners or to extend it past an obstacle. Our connectors feature an easy solderless clip connection and come in lengths from 6...

(0)
Model:CT-ACCESSORIE-003
- Display: Full color
- Line Length: 100mm
- Waterproof Level: IP20 / IP65
- Voltage: 5-24V
Various Options In Stock
$2.39 $1.7925% offFeatures: 1. With 1.64ft 3 conductor flat wire ready, you can DIY both strip-to-strip-bridge(jumper) and strip-to-power-lead connector wire that is up to 0.5 meters long, no stripping or soldering needed 2. Just place strip light or wire above connector's pin, then press cap down by pliers, the connection will be done well. Easily connect your dual color led strip to dimmer or...

(0)
Model:CT-ACCESSORIE-007
- PCB Width:10mm
- Connection Type:Board to Board
Various Options In Stock
$0.85Applicable to both normal dual color and digital flex strip light which have 3 solder pad on 10mm FPCB Easy to connect LED pixel strip to strip, just need a pliers, no need too many tools, no need to welding. Good for high-density light LED strip, don't mask the light of first LED. The pin pierce strip light through from the back and get contacted inside FPCB thickness gaining reliable fixing...

(0)
Model:CT-ACCESSORIE-004
- Wire Diameter: 0.5mm square
- Terminal Number: 3
- Package: 1 x Waterproof Connector Cable
- Way to Connect: Male and Female
Various Options In Stock
$1.98Each Waterproof Connector Cable Length:20cm /7.87 inch; After Docking Total Length: 40cm / 15.7 inch Wire Diameter: 0.5mm square; Terminal Number: 3 Package Content: 1 x Waterproof Connector Cable Way to Connect: Male and Female Ends Push In. Waterproof Design Wire Cable.

(0)
Model:CT-ACCESSORIE-016
- Sheath material:PVC
- Core material:bare copper wire
- Color:transparent
- WT:-30℃-80℃
Various Options In Stock
$1.98The transparent waterproof led connector uses a new raw material lettuce, the current transmission is more stable and faster. The power cord is made of pure copper wire, which has good conductivity, low resistance and low consumption. Mainly used in outdoor lamps such as IP68 waterproof led light strip , guardrail tube, point light source, hard light bar, aquarium and other indoor water...
Display all products in this category 1 to 14 (of 14 products)
© 2010-2022 SuperLightingLED.Inc. All Rights Reserved.
Site Map
top