| Select Kit: | LED Strips (Base), LED Strips + Controller, LED Strips + Controller + Power Adapter |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | Red + Blue (Base), Red + Green (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
This dual color led strip can emit either red or blue light, and you can create purple led tape lighting by turning red and blue light on at the same time. The brightness of the red and blue led strip lights can be adjusted at will, from very dim to very bright. In the process of mixing red and blue led light, you can also use a controller to freely adjust the brightness of either channel to make violet light more reddish or bluish.
Red and blue led strips operate on a 24V power adapter and have a very flexible board with an 8mm width. High flexibility allows you to bend led strip red blue into different shapes and letters. With adhesive backing, you can also simply stick it around corners and ceilings to provide even lighting. The density of the red blue led strip is at 168 LEDs per meter, with a total of 840 LEDs per reel(5m/ 16.4ft). Every 12 LEDs can be cut for length control.
Create a fun DIY colorful lighting experience with this led red blue tape. Please note that it can only be used for general lighting or ambient lighting, if you need red and blue led grow lights, please click here.
1.Dual-color led strip, red or blue light illumination, mixing can get violet color.
2.Each channel is fully dimmable with a controller, freely create reddish or bluish light.
3.2835 SMD, high density of 168 LEDs across each meter.
4.8mm/ 0.3in wide, with adhesive backing, easily install into aluminum channels.
5.Flexible and cuttable, with cutting segments every 12 LEDs (71mm/ 2.79in).
6.Available in non-waterproof (IP20) and waterproof (IP67) version.
Kit Product: PWM-CCT-SP632E controller (APP control) + PSPS-24V-96W power adapter
| LED Strip Type: | DC24V 2835 Two Color Red and Blue LED Strip Lights |
| LED Chip: | SMD2835 |
| Input Voltage: | 24V DC |
| PCB Width: | 8mm / 0.3in |
| Light Color: | Red + Blue |
| Dimension: | 16.4ft/roll |
| LED Quantity: | 168 LEDs per meter, 840 LEDs per reel |
| Working Power: |
R:36W/16.4ft B:38W/16.4ft R+B: 66W/16.4ft |
| Cut Unit: | 12 LEDs, 71mm/2.79" |
| Lifespan: | 50,000+hours |
| Beam Pattern: | 120 degrees |
| Waterproof: | Nonwaterproof IP20/ Waterproof IP67 |
