| Select Kit: | LED Strips + Controller + Power Supply, LED Strip + Controller, LED Strip (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base), 65.6ft (20 meters), 32.8ft (10 meters), 49.2ft (15 meters) |
| Select Light Color : | SPI/Addressable RGB (Base) |
| Select Operating Voltage: | 24VDC (Base) |
| Select Waterproof Rating: | IP20 Indoor Use (Base) |
| Availability | In Stock |
| Condition | Brand New |
The diffused addressable LED light strip is equipped with optical lenses to create uniform and soft illumination. Adopting TM1934 IC, this SPI LED strip supports user to choose the dynamic colorful lighting effects via addressable LED controller. The diffused LED strip boasts a density of 48 LED beads and 8 TM1934 IC. Each IC control 6 LEDs, allowing for grouped lighting effects like flowing, chasing, or gradual transitions.
Featuring dynamic lighting effects and uniform lighting, this diffused reflection LED tape is suitable for advertising lightboxes, sign lighting and signage. When set into neon diffusers, it also can create colorful neon lighting effects. [ It is 15mm wide, so it must be placed in a neon tube with an inner width of more than 15 mm.]
The diffused LED tube is 5 meters/16.4 feet a roll and every 124.9 mm (0.4 feet) is a cut unit. You can adjust the length according to your needs, especially for irregular spaces. Additionally, the diffused addressable LED strip is designed with an adhesive backing, making it easy to apply quickly to any desired location.
This lens rigid LED lighting is not cuttable. The rigid LED light strip needs to be used with a 24V power supply.
Features
1. The strip has a density of 48 LED 3030 chips and 8 IC per meter.
2. The IC type is TM1934.
3. Every 124.9mm/0.4feet is a cutting unit.
4. Every LED chip is equipped with one optical lens for a wide-angle and even light spread.
5. The color is RGBIC.
6. The diffused LED strip is always applied in advertising lightbox, sign lighting, signage lighting.
If you choose the lens led strip light kit, you will receive a 5m/16.4ft lens led strip, a SP530E Controller (without remote), and a LRS-150-24 power supply with an AC plug.
If you need water-resistant version, please check our 24V waterproof power transformer category and waterproof controller category.
|
LED Strip Type:
|
Diffused Flexible Lens LED Strip Lights |
| Adhesive Backing: | Yes |
| Input Voltage: | DC 24V |
| PCB Width: | 15mm / 0.78in |
| Power: | 10W/m |
| LED Color: | RGBIC |
| LED Quantity: | 48 LEDs/m |
| Cut: | 124.9mm/0.4 feet |
| CRI: | 85+ |
| Length: | 5m/3.28ft |
| LED Chip: | 3030 |
| IC Type: | TM1934 |
| IC Quantity: | 8pix/m |
| Channel Timing: | RGB |
