| Apply to: | SMD Strip (Base) |
|---|---|
| Select Connector Type: | 1*Strip to Strip Connector Only (Base), 1*Strip to Wire Connector With Cable, Strip to Strip Extension Connector |
| Select PCB Width: | 8mm (0.31in) (Base), 10mm (0.39in), 12mm (0.47in) |
| Availability | In Stock |
| Condition | Brand New |
3-pin waterproof led tape-to-tape connectors for IP-rated CCT tunable white SMD LED strips and single-signal addressable SMD LED strips, compatible with 8mm/10mm/12mm PCBs.
The 3 wire waterproof connector has three parts, a base with pins and two clear plastic frames for the SMD tapes. The clear plastic frames are empty at the point where the light strip is punctured, allowing glue to be squeezed through them to ensure that the cutting strip is reconnected in a watertight manner.
This tape light to tape light connector is designed for connecting two waterproofing 3-wire led strips, the use of transparent material will not affect the linear luminous effect of the light, to ensure the visual effect of the strips after connection.
Note: Please choose the right 3 core waterproof connector type according to the width of PCB, the waterproof width of 8mm PCB is about 10mm, the waterproof width of 10mm PCB is about 12mm, the waterproof width of 12mm PCB is about 14mm.
Type: 3 Pin Waterproof Electrical Connector
Material: Plastic + Metal Pins
Connection: Strip to Strip
Max Current: 6A
Pins: 3 (only for SMD led strips, can't for cob)
Apply to: 3-Wire Waterproof SMD CCT Led Strips & Digital SPI Led Strips like WS2812/WS2811/SK6812/UCS1903/UCS2904/TM1814/TM1824/TM1812
Compatible: IP67 and IP68 Silicone-Coated Tape Lights
PCB Width: 8mm (waterproof width 10mm), 10mm (waterproof width 12mm), 12mm (waterproof width 14mm)
