| Select PCB Width: | 8mm (0.31in) (Base), 10mm (0.39in) (Base), 12mm (0.47in) (Base) |
|---|---|
| Select Quantity: | 1 piece (Base) |
| Availability | In Stock |
| Condition | Brand New |
Waterproof cable wire end connector is a fast and reliable solution for extending and connecting two waterproof LED strip lights in outdoor, humid, or underwater environments. Its robust sealing ensures long-term durability in water conditions. The 2-pin waterproof extension cable connector is a waterproof led cable with connectors on both sides for a safe and waterproof connection between outdoor two-wire LED strips.
The connectors feature a transparent locking frame, align the waterproof LED strip’s copper pads with the connector’s metal pins. The transparent frame leaves an open cavity at the strip’s piercing point—injecting silicone sealant before insertion ensures zero moisture ingress while preserving waterproofing. Also, the "+" pin is clearly labeled for correct polarity alignment.
Note: Please choose the right waterproof connector for led strips 2 pin type according to the width of PCB, the waterproof width of 8mm PCB is about 10mm, the waterproof width of 10mm PCB is about 12mm, the waterproof width of 12mm PCB is about 14mm.
• No soldering required—saves time and reduces failure risks.
• Reusable design (if sealed properly) for future adjustments.
• Superior IP67 waterproofing compared to standard clip-on connectors.
• Applications: outdoor landscape lighting, underwater pool/spa lighting, marine vessel illumination, bathroom or sauna LED installations
• The overall length of the extension connector is approximately 220mm/8.66in
Type: Outdoor Extension Cord Waterproof Connector
Material: Plastic + Metal Pins
The length of the cable: 20 centimeters (approximately)
Connection: Strip to Strip
Max Current: 6A
Pins: 2 (if used for cob strip lights, please pay attention to whether the position of the 2 pins corresponds to the position of the solder joints of the cob PCB)
Apply to: Outdoor Waterproof 2-Pole LED Strip Lights with Single Color or 2-Wire CCT (tunable color temperature)
Compatible: IP67 and IP68 Silicone-Coated Tape Lights
PCB Width: 8mm (waterproof width 10mm), 10mm (waterproof width 12mm), 12mm (waterproof width 14mm)
