ESP32 WLED 4CH Digital LED Strip Programmable Light Controller

This GL-C-017WL-D esp32 wled WiFi controller is designed for a variety of RGB and RGBW digital light strips and supports 5V, 12V and 24V voltage inputs. Featuring a simple-to-wire port design, just open the port, plug the wire into the port, and then cover the port to complete the wiring.

The controller provides four output channels to control up to four pixel led strips simultaneously, such as WS2812, WS2811, SM16703, SK6812 and so on. The maximum output current is 15A. Users need to be careful that the total power of the light strips does not exceed the loadable capacity of the controller when using one power supply to power both the controller and the light strips. Otherwise, it may lead to problems in lighting control. 

In addition, the controller supports a maximum of 800 pixel points, and the total number of IC pixels of all light strips should not exceed this number to ensure stable operation of the addressable led lighting system.

To ensure safe use, the controller has a built-in 15A fused fuse to provide overload protection. This feature effectively prevents equipment damage due to excessive current and extends the life of the controller. Specially, this controller comes with an IO33 DIY port, which allows users to connect additional buttons or sensors to add flexibility and personalized options for lighting control.

• Equipped with UART download function (Type-C download port) to support firmware upgrade 

• With microphone function to support music rhythms 

• Provides night light function, which allows users to set the night lighting mode according to their needs

(All WLED digital controllers with version 0.15 or higher can control WS2805 RGBCCT led IC lights.)

Another similar 4-channel pixel LED controller is the Mi-light SPIW5-4 model, which you may also want to consider.

Manual Download