| Select LED Quantity: | 60 LEDs/m (10 Pixels/m) (Base) |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Light Color : | Addressable RGB, Addressable RGB+Daylight White(6000K) (Base), Addressable RGB+Warm White(3000K) (Base), Addressable RGB+Natural White 4000K (Base) |
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | IP54 For Damp Environments, IP20 Non-Waterproof (Base) |
| Availability | In Stock |
| Condition | Brand New |
Flexible Zigzag PCB for Shapeable Architectural & Signage Lighting
When illuminated advertising signage needs to interact, synchronize, or animate in coordination with other lighting systems, a standard RGB LED strip is no longer enough. This is where DMX pixel-level control becomes essential.
Designed with a flexible S-type (zigzag) PCB, this DMX512 pixel LED strip allows smooth bending in both horizontal and vertical directions, making it ideal for curved advertising signs, channel letters, dynamic architectural outlines, and creative lighting installations.
In bar, club, and entertainment venues, it pairs perfectly with bendable recessed aluminum profiles to create flowing, animated lighting lines that follow complex architectural forms.
Every 6 LEDs form an independent circuit, and each 100mm/3.93" segment functions as an individual pixel, allowing you to program lighting effects through a DMX controller.
Direct DMX signal input, 10 pixels per meter.
Comes standard in 5-meter rolls and can be cut at the marked black cut lines located at the solder pads.
5-pin JST-SM male and female connectors are pre-installed on both ends for easy DMX signal and power connection.
| LED System: | Addressable LED Strip Lighting |
| Brand: | SuperLightingLED |
| Item Type: | Flexible S-Type Shapeable DMX Pixel LED Strip |
| LED Chip: | SMD5050 |
| IC Chip: | UCS512C1L (RGBW), TM512ACE (RGB) |
| Driven: | DMX directly control (DMX signal) |
| Input Voltage: | DC24V |
|
Power:
|
18.7W/m @RGBW, 15.8W/m @RGB
|
| Length: | 5m/16.4ft |
|
PCB Width:
|
12mm
|
| LED Quantity: | 60 LEDs/m |
|
IC Quantity:
|
10 ICs/m (1 IC controls 6 LED lights), 50 per roll
|
|
Cut Unit:
|
100mm/3.93in, 6 LEDs can be cut
|
| Waterproof Rating: | Non-waterproof IP20, Splash-proof IP54 |
| Installation: | Adhesive backing |
| Solder Joints: | 24V+, Pi/Po (DMX addresses), A (DMX signal 1), B (DMX signal 2), GND |
| Outlet Cable: | JST SM female male 5-pin connectors + 2-pin power connectors |